User manual SANYO PLC-XL45

[. . . ] Multimedia Projector MODEL PLC-XL45 Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Large Screen in Limited Space Short focus lens allows you to project large images from short distance (p. 13). Digital Zoom (for Computer) The digital zoom function allows you to focus on crucial information during a presentation. 16 times the screen size and compress them to approximately a quarter of the screen size (p. 33). ecurity Features S The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top control or remote control (p. 47). [. . . ] Use the Point ed7 8 buttons to pan the image. When reached to the correction limit, the arrows disappear. Wide Provide the image to fit wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9. Full screen Provide the full screen image. Note: ·This projector cannot display any resolution higher than 1600 x 1200. If your computer's resolution is higher than that, lower the resolution before connecting to the projector. ·The image data other than 1024 x 768 is modified to fit the screen size in initial mode. ·True, Full screen, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 26). Computer Input Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog box appears. Scale H/V. . . . . . . . . Adjust the Horizontal/Vertical screen scale. H&V . . . . . . . . . . . . . . . When set to "On, the aspect ratio is fixed. " "Scale V" appears dimmed and becomes unavailable. Adjust "Scale H, then the " screen scale is automatically modified based on the aspect ratio. Position H/V. . . . . . Adjust the Horizontal/Vertical screen position. Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at "Yes. " When Custom is selected, the saved scale is used. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at "Yes. " Press the SELECT button at Common or Reset, to display a confirmation box. Note: ·When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears. [. . . ] The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. It may cause an electric shock or a fire hazard. · · · green. [. . . ]