User manual SANYO PLC-XL50 BASIC SERIAL COMMAND SPECIFICATIONS V1.00

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SANYO PLC-XL50. We hope that this SANYO PLC-XL50 user guide will be useful to you.

Lastmanuals help download the user guide SANYO PLC-XL50.

Download

Manual abstract: user guide SANYO PLC-XL50BASIC SERIAL COMMAND SPECIFICATIONS V1.00

Detailed instructions for use are in the User's Guide.

 [. . . ] BASIC SERIAL COMMAND SPECIFICATIONS PLC-XL50
Ver. 1. 00

PLC-XL50 Basic Serial Command Specifications

ÿ

CONTENTS ÿ

1. Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Serial Interface Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. 1.  [. . . ] Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

6. 32. 

BRIGHTNESS ­ Command
Command Detail Response "C21" [CR] Brightness of User Control ­1. Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

6. 33. 

Computer 2 RGB Command
Command "C25" [CR] Select RGB input of Computer 2. Yet,  when Computer 2 is set for Monitor Out in Terminal setting,  Response OK is returned but not executed. Notes) This command is not executed while the projector returns OK,  when Input search is On1/On2. Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

Detail

Response

14/23

PLC-XL50 Basic Serial Command Specifications

6. 34. 

IMAGE (Toggle) Command
Command Detail "ÿ# ÿ "[CR] Switch Image Setting status. This command works the same as "IMAGE" button on the projector or remote control as "IMAGE" function. Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

Response

6. 35. 

ON START Setting Command
Command Detail Response "C28" [CR] Set Power ON Start. This status is stored in EEPROM and retained regardless of Power OFF/ON. Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

6. 36. 

ON START Cancel Command
Command Detail Response "C29" [CR] Cancel Power ON Start. This status is stored in EEPROM and retained regardless of Power OFF/ON. Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

6. 37. 

Power Management Ready Command
Command Detail Response "C2A" [CR] Set Power Management to Ready mode. This status is stored in EEPROM and retained regardless of Power ON/OFF. Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

6. 38. 

Power Management OFF Command
Command Detail Response "C2B" [CR] Set Power Management OFF. This status is stored in EEPROM and retained regardless of Power ON/OFF. Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

6. 39. 

Power Management Shut down Command
Command Detail Response "C2E" [CR] Set Power Management to Shut down mode. This status is stored in EEPROM and retained regardless of Power OFF/ON. Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

15/23

PLC-XL50 Basic Serial Command Specifications

6. 40. 

D. ZOOM + Command
Command Detail Response "C30" [CR] Make screen image larger. This command works the same as "ZOOM " button of the remote control. Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

6. 41. 

D. ZOOM ­ Command
Command Detail Response "C31" [CR] Make screen image smaller. This command works the same as "ZOOM " button of the remote control. Acceptable Unacceptable [ACK] [CR] "ÿ "[CR]

6. 42. 

Video Auto Command
Command Detail "C32" [CR] Select Auto input of Video Source. Notes) This command is not executed while the projector returns OK,  when Input search is On1/On2.  [. . . ] When Power On is executed,  the information of temperature anomaly is canceled and normal operation is executed. 

7. 3. 8. "24"[CR]
Status : Processing Power Save / Cooling Down Power management function in the Setting menu works and the status goes to Power Save / Cooling Down. During this time,  Functional Execution Commands are invalid. This status moves to Power Save at set hours after the operation of Cooling Down.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO PLC-XL50

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO PLC-XL50 will begin.