User manual SANYO PLC-XU110

[. . . ] Multimedia Projector MODEL PLC-XU110 Network Supported Wireless LAN IEEE802. 11b/g Wired LAN 100-Base-TX/10-Base-T Memory Viewer USB Memory Viewer (optionally available) Compatible with a dedicated USB memory Refer to the owner's manuals below for details about network and memory viewer function. Network Set-up and Operation Owner's Manual USB Memory This manual is provided with optionally supplied USB memory. Owner's Manual 2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use. Logo Function The Logo function allows you to customize the screen logo (pp. 49­50). [. . . ] Move the pointer to the desired source and then press the SELECT button. When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1. Video Input Menu icon Input Menu Move the pointer to Video and press the SELECT button. VIDEO Source Select Menu (VIDEO) Move the pointer to the source that you want to select and press the SELECT button. Auto Video When video input signal is connected to the VIDEO jack, select Video. When video input signal is connected to the SVIDEO jack, select S-video. S-video Notes: ·Wired, Wireless, and Memory viewer are for the Network function. See the owner's manual "Network Set-up and Operation" and owner's manual of Memory viewer (optionally available). ·When the Input Search function is set to "On1" or "On2", the input signal will be searched automatically (p. 51). 40 Video Input Input Source Selection (Component, RGB Scart 21-pin) Direct Operation Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. Top Control INPUT button Computer 1 (Analog) Computer 1 (Digital) Computer 2 Video Wired Remote Control COMPUTER button Computer 1 (Analog) Computer 1 (Digital) Computer 2 Menu Operation 1 2 3 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. Use the Point ed buttons to move the red arrow pointer to Computer 2 and then press the SELECT button. After the Source Select Menu appeared for Computer 2, move the pointer to Component or RGB(Scart) and then press the SELECT button. When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Component-VGA Cable, select Component. Input Menu Input Menu icon Component Move the pointer (red arrow) to Computer 2 and press the SELECT button. Computer 2 RGB (Scart) When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a ScartVGA Cable, select RGB (Scart). Source Select Menu Move the pointer to Component or RGB(Scart) and press the SELECT button. Note: ·Wired, Wireless, Memory viewer are for the Network function. See owner's manual "Network Set-up and Operation" and owner's manual of Memory viewer (optionally available). ·When the Input Search function is set to "On1" or "On2", the input signal will be searched automatically (p. 51). 41 Video Input Video System Selection 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. Use the Point ed buttons to move the red arrow pointer to the desired system and then press the SELECT button. AV System Menu (Video or S-Video) AV System Menu icon The selected system is displayed. Move the pointer to the desired system and press the SELECT button. Video or S-Video Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4. 43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4. 43, PAL-M, and PAL-N. AV System Menu (Component) AV System Menu icon The selected system is displayed. Component Auto The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. [. . . ] (KHz) 31. 47 31. 47 31. 25 37. 879 43. 363 48. 36 47. 7 48. 36 56. 160 46. 500 47. 776 60. 289 68. 633 49. 600 V-Freq. (Hz) 59. 94 59. 88 50. 00 60. 32 60. 00 60. 00 60. 00 60. 00 72. 000 50. 000 59. 870 74. 893 84. 837 60. 050 ON-SCREEN DISPLAY D-SXGA1 D-SXGA2 D-SXGA+ 1 D-720p D-1035i D-1080i D-1080i RESOLUTION 1280 x 1024 1280 x 1024 1400 x 1050 1280 x 720 1920 x 1035 1920 x 1080 1920 x 1080 H-Freq. (KHz) 63. 98 60. 276 63. 97 45. 00 33. 75 33. 75 28. 125 V-Freq. (Hz) 60. 02 58. 069 60. 19 60. 00 60. 00 (Interlace) 60. 00 (Interlace) 50. 00 (Interlace) Note: ·When the input signal is D-SXGA 1, D-SXGA 2, or D-SXGA 3, images may not be displayed properly depending on computers. 73 Appendix Technical Specifications Mechanical Information Projector Type Dimensions (W x H x D) Net Weight Feet Adjustment Multi-media Projector 13. 15" x 3. 07" x. 9. 13" (334 mm x 78 mm x 232 mm) (Not including adjustable feet) 7. 7 lbs (3. 5 kg) 0° to 9. 0° Panel Resolution LCD Panel System Panel Resolution Number of Pixels 0. 8" TFT Active Matrix type, 3 panels 1, 024 x 768 dots 2, 359, 296 (1, 024 x 768 x 3 panels) Signal Compatibility Color System High Definition TV Signal Scanning Frequency PAL, SECAM, NTSC, NTSC4. 43, PAL-M, and PAL-N 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i H-sync. [. . . ]