User manual SANYO PLC-XW55

[. . . ] Multimedia Projector MODEL PLC-XW50 PLC-XW55 Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and work anywhere you wish to use. [. . . ] (From 0 to 63. ) White balance (Blue) Press the Point 7 button to lighten the blue tone and the Point 8 button to deepen the blue tone. (From 0 to 63. ) Sharpness Press the Point 7 button to soften the image and the Point 8 button to sharpen the image. (From 0 to 15. ) Gamma Press the Point 7 8 buttons to adjust the gamma value to obtain better balance of contrast. (From 0 to 15. ) Reset To reset the adjusted data, select Reset and press the SELECT button. The confirmation box appears and then select [Yes]. All adjustments returns to their previous figures. Press the Point 7 8 buttons to adjust the value. Selected Image level Computer Input Note: After adjusting any of the White balance Red, Green, or Blue, the Color temp changes to "Adj. ". 31 Computer Input Store To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box appears and then select [Yes]. Stored data can be called up by selecting "Image" in the Image Level Selection on page 30. Quit Exit the Image Adjust Menu. Store item Press the SELECT button at this item to store the adjusted data. The confirmation box appears, then select [Yes]. Move the red framed pointer to any of Image 1 to 4 where you want to set and then press the SELECT button. Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the image size. 1 2 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Screen Menu icon. Press the Point ed buttons and move the red framed pointer to the function that you want to select and then press the SELECT button. Normal Screen Menu Screen Menu icon Move the red framed pointer to the function and press the SELECT button. Provide the image to fit the screen size. True Provide the image in its original size. When the original image size is larger than the screen size (104 x 768 ), this projector enters panning mode automatically. Pan the image with Point ed 7 8 buttons. When reached to the correction limit, the arrows disappears. Wide Provide the image to fit wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9. [. . . ] Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, disconnect the AC power cord and contact the dealer or the service center. It may cause an electric shock or fire hazard. · · · green · · · blinks green · · · red · · · blinks red · · · off 60 When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. [. . . ]