User manual SANYO PLC-XW60

[. . . ] Multimedia Projector MODEL PLC-XW60 PLC-XW60K Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and work anywhere you wish to use. [. . . ] Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at "Yes". Press the SELECT button at Common or Reset, to display a confirmation box. Notes: · When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears. · The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. 5 Computer Input For zooming in and out the images Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and the message "D. Press the SELECT button to expand the image size. And press the Point ed 7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM e button on the remote control. Digital zoom ­ When Digital zoom ­ is selected, the On-Screen Menu disappears and the message "D. Press the SELECT button to compress image size. A projected image can be also compressed by pressing the D. ZOOM d button on the remote control. To exit the Digital zoom +/­ mode, press any button except the D. ZOOM ed buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment or select an input source from the Input Source Selection (p. 26) again, or adjust the screen size with the D. ZOOM ed buttons. Remote Control POINT buttons SELECT button D . ZOOM + button D . ZOOM - button Notes: · The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p. 30) · The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working or when the Custom is selected for the screen size. · True, Full, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 27). · Digital zoom +/- cannot be selected when Full or True is selected. 6 Video Input Input Source Selection (Video) Direct Operation Choose Video by pressing the VIDEO button on the remote control. Remote Control VIDEO button Video Menu Operation Input Menu icon 1 2 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon. Press the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button. Input Menu Move the pointer to Vi d e o a n d p r e s s t h e SELECT button. Note: When the Input Search function is set On1 or On2, the input signal will be searched automatically (p. 46) 7 Video Input Input Source Selection (S-video, Component, RGB Scart 1-pin) Direct Operation Choose S-video, Component or RGB(Scart) by pressing the COMPUTER button on the remote control. Before using COMPUTER button, correct input source should be selected through Menu operation as described below. Remote Control COMPUTER button COMPUTER button S-video Component Note: The operations in the figure are processed when the Input Search function is set to "Off". Computer Computer RGB(Scart) Computer See Notes at the bottom of this page. Menu Operation Input Menu Input Menu icon 1 2 3 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon. Press the Point ed buttons to move the red arrow pointer to Computer 1 and then press the SELECT button. [. . . ] When the projector is cooled down enough and the temperature returns to normal, the POWER indicator lights red and the projector can be turned on. (The WARNING indicator keeps blinking. ) Check and clean the air filter. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. [. . . ]