User manual SANYO PLCXF47 DIMENSIONS

[. . . ] 48, 50 - 52) Digital Zoom (for Computer) The digital zoom function allows you to focus on crucial information during a presentation. 16 times the screen size and compress them to approx. 34) Security Features - The projector cannot be operated without remote control. Keep the remote control securely at hand to minimize the risk of theft. [. . . ] Full screen Provide the full screen image. Note: Computer Input · This projector cannot display any resolution higher than 1600 X 1200. If your computer's screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. ·The image data in other than 1024 x 768 is modified to fit the screen size in initial mode. · True, Full screen, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 27). 33 Computer Input Custom Adjust the screen scale and position manually. "Custom" is displayed on the screen for a few seconds and then "Aspect" box appears. Scale H / V . . . . . . . Adjust the Horizontal / Vertical screen scale. H&V. . . . . . . . . . . . . . . . . . When selecting "On", the aspect ratio is fixed. "Scale V" becomes gray and unselectable. Adjust "Scale H", then the screen scale is automatically modified based on the aspect ratio. Position H / V . . . Adjust the Horizontal / Vertical screen position. Remote Control VIDEO button Menu Operation Input Menu icon Input Menu Move the pointer to Video and press the SELECT button. 1 2 3 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon. Press the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu . VIDEO Source Select Menu (VIDEO) Move the pointer to the source that you want to select and then press the SELECT button. When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1. Video Video When video input signal is connected to the VIDEO jack, select Video. When video input signal is connected to the SVIDEO jack, select S-Video. Move the pointer to the source that you want to select and press the SELECT button. Auto Computer Input S-Video 35 Video Input Input Source Selection (Component, RGB Scart 21-pin) Direct Operation Select Computer 1 by pressing the COMPUTER button on the remote control. Before using COMPUTER button, select the correct input source through Menu operation as described below. Remote Control COMPUTER button COMPUTER button Computer 1 Computer 2 Menu Operation 1 2 3 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon. Press the Point ed buttons to move the red arrow pointer to Computer 1 and then press the SELECT button. After the Source Select Menu appeared for Computer 1, move the pointer to Component or RGB(Scart) and then press the SELECT button. Input Menu icon Input Menu Move the pointer (red arrow) to Computer 1 and press the SELECT button. [. . . ] (The WARNING indicator keeps blinking. ) Check and clean the air filters. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. The projector detects an abnormal condition and cannot be turned on. [. . . ]