User manual SANYO POA-WMST01

[. . . ] TELESCOPIC WALL MOUNT POA-WMST01 CONTENTS · · Telescopic wall mount POA-WMST01 (93-156 cm) Thread screws: 4 x M3, 4 x M4, 4 x M5, and 4 x M6 HINTS: · · · · · · PLEASE CHECK THE PRODUCT BEFORE INSTALLATIONS FOR ANY DEFORMATIONS OR MISSING PARTS AND CONTACT YOUR SUPPLIER FOR MAINTENANCE IF REQUIRED. [. . . ] CHECK THE LOCAL/NATIONAL REGULATIONS IN PUBLIC/COMMERCIAL USED ROOMS. INSTRUCTIONS FOR USE: STEP 1: The telescopic wall mount should be fixed to the wall horizontally by a trained specialist using the right kind of screws according to the structure of the wall ( Figure 1a). Conceal the cables inside the cable duct and prevent the cables from damage during the process and be aware that the product is conductive, never use unisolated cables. ( Figure 1 b). Tighten the cable cover part with the plastic ring to the body of the wall mount ( Figure 1c). Figure 1a Figure 1 b Figure 1c STEP 2: Mount the appropiate thread screws ( M3, M4, M5 or M6) in the threaded holes on the base of the projector with a screwdriver ( Figure 2). [. . . ] Tighten the cam lever on the pivot point after adjusting the position ( Figure 4) Figure 4 STEP 5:Push the safety button towards the arrow direction to set the wall-projector distance ( Figure 5). [. . . ]