User manual SANYO RM-6860

[. . . ] The rating label is located on the bottom of the unit. 2 PRECAUTIONS Keep the radio away from heating appliances and electric sources that could cause static on the radio such as fluorescent lamps and motors. Do not play your earphone at a high volume level. [. . . ] The unit is not disconnected from mains, even switched off. Earphone Connect the 1/8-inch (3. 5mm) earphone to the EAR socket for (mono output) on the back of the radio for monitoring or for private listening. The speakers are automatically disconnected when the earphone is connected. ADJUSTING THE CLOCK 1. While holding the TIME SET button down, push the FAST UP or SLOW DOWN button respectively to select the current time. Turn the TUNING control to tune in a station. To turn the radio off, set the RADIO AUX/ON/OFF switch to OFF. . Aerials - For AM reception, rotate or relocate the unit to a different position to improve the reception of a distant or weak station. - For FM reception, a short wire aerial is provided. Unwind the short wire aerial and extend it to full length. SETTING THE ALARM Set the RADIO AUX/ON/OFF switch to OFF. Set the ALARM1 or ALARM 2 switch to the appropriate position. For the first alarm time setting, set the ALARM switch to ALARM 1. For the second alarm time setting, set the ALARM switch to ALARM 2. While holding the ALARM 1 or ALARM 2 button down, push the FAST UP or SLOW DOWN button respectively to select the wake-up time. Note: If you want to check the time setting, simply push the ALARM 1 or ALARM 2 button. If you want to wake up with the radio, tune in the station and adjust the volume level first. [. . . ] - If you push the SLEEP button after sleep time setting, the sleep time will be shown. (If you hold the SLEEP button for more than 2 seconds, it will count down automatically. AUX IN FUNCTION 1. [. . . ]