User manual SANYO SC-X1800B

[. . . ] Children should be supervised to ensure that they do not play with the appliance. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Do not handle plug or appliance with wet hands. [. . . ] If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. · · · · · · · · · · · · · · · · · · 2 Use Instructions Introduction of Parts 1 2 3 4 5 6 7 8 9 10 Power cord Cord rewinding pedal Handle ON/OFF switch pedal Speed control Front cover clip Hose socket Dust cup Dust cup handle Wheels Accessories: 1 set hose accessory 1 piece floor brush 1 set metal telescope tube 1 combination nozzle 1. Connect the hose accessories; insert the hose end into the hose socket at the front cover and then hook it. Figure_1 Make sure the front cover is firmly locked before hose setting. Connect the metal tube to the curved end of the hose. Connect the different tools to the tube for different cleaning purposes; Floor brush (adjusted to the type of ground) for carpet or floor. Combination nozzle for sofa, wall surface, curtain, corner or space between furniture etc. Before starting operation, pull out the power cord and then insert the plug into the power socket which conforms to that on the rating label for power supply. Press the on/off switch pedal, the machine could start working. The machine would start working without speed control. To control suction power, slide the speed control on the body. Suction power can also be controlled by sliding the airflow control on the hose. Combination nozzle; Use the crevice nozzle on vacuum edges and gaps. The head of the combination nozzle can rotate. Use the round brush to vacuum sofa, curtain or fragile or easily scratched items. Turn off the machine: press the on/off switch pedal again, the machine is turned off. Cord rewinding; Before rewinding, be sure to the cord is unplugged. [. . . ] Check for blockages and unblock and allow it to cool. If the vacuum power decrease, rinse the HEPA filter and the exhaust filter Nozzle is clipped into a compartment at the bottom edge on the back of the vacuum cleaner (between the wheels). Due to the strong suction power, it may be difficult to push, especially thick carpet. [. . . ]