User manual SANYO SCP-8200

[. . . ] Sanyo SCP-8200 User's Guide www. qwestwireless. com Table of Contents Welcome to Qwest . . 14 Using Your Phone's Battery and Charger . . 23 Adjusting Volume During a Conversation . . 27 Dialing and Saving Phone Numbers With Pauses . [. . . ] Outgoing shows the last 10 different Ready Link calls you placed. Incoming shows the last 10 different Ready Link calls you accepted. Missed shows the last 10 Ready Link calls you missed. Note: The icon next to the group name indicates a group. Section 2J: Using Ready Link 132 Making a Ready Link Call (1-to-1 Call) You can place a 1-to-1 Ready Link call by entering a Ready Link number or by selecting a contact from the Ready Link List. To place a Ready Link call by selecting a contact: 1. Press R-Link (left softkey) or press List. to access the Ready Link 2. Press Go to (left softkey), highlight the list from which you want to place a call (Personal List, Outgoing, Incoming, or Missed), and press . Tip: You can also select Enter R-Link# from the Go to option to enter a Ready Link number directly. Highlight the contact you want to call, and press and hold to place the call and get the floor. followed by "You have floor. " You can now begin speaking. ) ­ or ­ Highlight the contact you want to call and press and release to place the call. (The call will connect as described above, but "Floor is open. " will appear on the screen and either you or your contact may press and hold to take the floor and speak. ) To see an entry's information, press during step 3 above. Note: During a Ready Link call, the "floor" is the right to speak. When you see ) can "Floor is open. , " the first person to press the Ready Link (Memo) button ( speak (while holding the button). Only the person who has the floor can speak. The phone beeps if you press the Ready Link (Memo) button when another contact has the floor. 4. When you are finished speaking, release the Ready Link (Memo) button to allow other contacts to speak. (When the other party takes the floor, you will see the speaker's name and phone number and the text "has floor. ") 5. Note: When neither party has the floor during a Ready Link call, "Floor is open. " appears on the display. If no one takes the floor for 20 seconds, the Ready Link call ends automatically. Tip: If you press voice call. or during step 3 above, you can make a standard Section 2J: Using Ready Link 133 Making a Ready Link Call (Group Call) You can make a Ready Link call to all members in a Group entry, which you have in your Ready Link List. You can communicate with up to five members at a time. To place a Ready Link Group call: 1. Press R-Link (left softkey) or press List. to access the Ready Link 2. Press Go to (left softkey), highlight Personal Groups, and press . Highlight the group you want to call, and press and hold to place the call and take the floor. [. . . ] At the present time, most of the non-military research on biological effects of RF energy in the U. S. is being funded by industry organizations. More research is being carried out overseas, particularly in Europe. In 1996, the World Health Organization (WHO) established the International EMF Project to review the scientific literature and work towards resolution of health concerns over the use of RF technology. [. . . ]