User manual SANYO SRC-800

[. . . ] INSTRUCTION MANUAL SRC-800 Video Cassette Recorder Please read this manual and accompanying "IMPORTANT SAFETY INSTRUCTIONS" sheet carefully before connecting your VCR and operating it for the first time. Be sure to read carefully and follow all the PRECAUTIONS on page 2. Keep the manual in a safe place for future reference. PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. [. . . ] Rewinds the tape to the beginning, then goes to stop mode STOP . Goes to stop mode 4 Press the PAUSE/SEARCH button to save the setting. 4 Press the PAUSE/SEARCH button, the normal screen is displayed. NOTES: · If "TAPE END MODE" has been set to "REW", the · Press the EJECT, FF, REW or PLAY button to turn the indicator off. TAPE END indicator will flash while the tape is rewinding. 13 SERIES RECORDING Using 2 VCRs or more, the series recording function lets you switch recording from one unit to the next (only with VCRs of the same model as this one). The SERIES OUT signal will be presence either at the point when the counter reading is 7:57:00 or when VCR No. 1 reaches the end of the tape, whichever is first. The signal will stop 70 seconds after the tape end point of VCR No. During the period when the SERIES OUT signal is being received by VCR No. 2, if the STOP button of VCR number 2 is accidentally pressed, VCR No. 2 will go into the stop mode for an instant and then return to the record mode. To prevent this form occuring, the security lock of VCR No. When the end of the tape is reached on VCR, the tape will rewind and then stop, if TAPE END MODE is set to "REW". (TAPE END indicator will be flashed until the EJECT, FF, REW, PLAY or REC button is pressed. ). Series Recording Setup 1 Connect 2 VCRs or more as illustrated below. 2 Set the following items as indicated. Item Cassette tape Operation mode "SERIES REC" (in (SET UP 2) menu) Security lock VCR No. 1 Loaded Stop Y (YES) Canceled VCR No. 2 and on Loaded Stop Y (YES) Set 3 Press the REC button on VCR No. 1. 4 Set the security lock on VCR No. 1. NOTES: ° Recording will start in series recording mode. · If the counter reading on VCR No. 1 is 7:57:00 or more, when the REC button is pressed (step 3), the recording will start on VCR No. 2. series recording will not be possible. · If in the (SET UP 2) menu "SERIES REC" is set to "N", · T-160 must be used for proper serial out operation. · The counter must start from the beginning of tape, or the series recording out will not function properly. Series recording connections Monitor TV Video camera To VIDEO OUT jack (VCR) VCR No. 1 To VIDEO IN jack VCR No. 2 To VIDEO IN jack To COM terminal To VIDEO OUT jack To COM terminal To SERIES OUT terminal To VIDEO OUT jack To SERIES OUT terminal To VIDEO IN jack (VCR No. 3) To SERIES IN terminal To SERIES IN terminal (VCR No. 3) 14 SERIES RECORDING Continous Loop Recording Setup It is possible to configure at least two this VCR for continous loop recording. Under loop recording when the recording finishes on the first unit, the new recording will start on the second unit. When the recording finishes on the second unit, recording will start on the first unit. NOTES: · The "TAPE END MODE" in (SET UP 2) menu should be set to "REW" for both units without fail. end of the first tape is rearched. · The TAPE END indicator will continue to bink when the · Under loop conditions, the tape will continue to re-record. If you need to keep the recorded infomation, please remove the tape after recording is complete and insert and new tape. 1 The SERIES OUT terminal of VCR No. 2 and the SERIES IN terminal No. 1 should be connected (See diagram). 2 Set the following items as indicated. Item Cassette tape Operation mode "TAPE END MODE" (in (SET UP 2) menu) "SERIES REC" (in (SET UP 2) menu) Security lock VCR No. 1 Loaded Stop REW Y (YES) Canceled VCR No. 2 and on Loaded Stop REW Y (YES) Set 3 Press the REC button on VCR No. 1. [. . . ] SYMPTOM No power No image displayed on the monitor TV POSSIBLE CAUSE The power cord is not connected The connections are not correct The power to the camera and/or monitor TV is not turned on A cassette tape is not loaded All functions are suspended due to condensation The security lock is engaged Recording is not possible (the tape is ejected) Noise in the playback picture The date and time are not recorded The cassette tape cannot be ejected The loaded cassette has no erasure-prevention tab The video heads need cleaning The ON SCREEN switch is set to the "OFF" position Problem with the system CORRECTIVE ACTION Connect the power cord Check that all connections are correct Turn all connected devices power on Load a cassette Wait for the "À" indicator to go off Cancel the security lock Load a cassette tape with erasure-prevention tab or cover the tab hole with adhesive tape Clean the video heads Set the ON SCREEN switch to the "ON" position Unplug the power cord then plug it back in The buttons do not respond System Down If the unit does not function at all, try the following. 1 Unplug the power cord then plug it back in. (Press the ALL RESET button. Under normal conditions, do not touch the ALL RESET button. ) 3 If the problem is not corrected after performing steps 1 and 2 a few times, consult your dealer. 22 SPECIFICATIONS General Specifications Video heads system Dual-azimuth 4-head rotating helical scanning system: Dual azimuth 2-head for record and standard playback Dual azimuth 4-head for cue, review and still mode In 8-hour modes 11. 12 mm /sec VHS 1/2 inch video cassette tape 8 hours (when using T-160 tape) approximately 3 minutes 30 seconds (when using T-160 tape) NTSC color TV system Audio recording Tape speed Specified video cassette tape Recording/playback time Fast forward/rewind time Television system Video Recording method Video input Video output Horizontal resolution Luminance signal: FM recording Chrominance signal: Down-converted direct recording 1 Vp-p, BNC, 75 , unbalanced 1 Vp-p, BNC, 75 , unbalanced Black & white mode 350 line or more Color mode 300 line or more Audio Input Output Microphone input ­8 dBs, RCA pin jack, 27 k, unbalanced ­8 dBs, RCA pin jack, 600 , unbalanced ­60 dBs, 3. 5 mm mini jack, 10 k, unbalanced Connectors Clock set input Clock set output Series input Series output Eject input Eject output Common Remote control input Contact closes with no voltage DC 5 V (±0. 5)/5. 7 k Contact closes with no voltage DC 5 V (±0. 5)/5. 7 k Contact closes with no voltage DC 5 V (±0. 5)/5. 7 k 0 V (GND) 3. 5 mm mini jack Other Specifications Operating temperature range Operating humidity range Power requirements Power consumption Dimensions Weight 5°C to 40°C 80% or less AC 120 V, 60 Hz 17 W 240 (W) x 96. 5 (H) x 335 (D) mm approximately 3. 8 kg NOTE: The specifications and external appearance of this unit are subject to change without notice. 23 SANYO INDUSTRIAL VIDEO VCR LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by writing to SFS Corporation, SFC's warranty administrator, at any of the addresses listed below, or by calling (toll-free) 1-800-421-5013. New Jersey Office 210 Riser Road Little Ferry, NJ 07643 201-641-3000 California Office 1200 W. [. . . ]