User manual SANYO SRM-CD620 BROCHURE

[. . . ] CHECK THE USER MANUAL OF THE PROJECTOR TO SET THE PROJECTOR DISTANCE TO SCREEN. [. . . ] THE WALL MOUNT SHOULD ONLY BE INSTALLED BY A TRAINED SPECIALIST . THE MAXIMUM LOAD CAPACITY OF THE WALL MOUNT IS 20 KG. BE SURE THAT THE WALL MOUNT IS INSTALLED IN A SAFE POSITION ABOVE HEAD HEIGHT AND NOT OVER EXISTING PASSAGEWAYS. Figure 2 STEP 3: Mount the ball joint systeme ( after the projector has been mounted to the movable arms) to the body of the telescopic wall mount which was fixed to the wall in the first step. Then fix the screw to prevent ball joint systeme from falling on the ground as in Figure 3. Figure 3 STEP 4: The ball joint systeme can be adjusted 360° horizantally and 20° vertically. Tighten the cam lever on the pivot point after adjusting the position ( Figure 4) Figure 4 STEP 5:Push the safety button towards the arrow direction to set the wall-projector distance ( Figure 5). [. . . ] Then fix the screw to prevent ball joint systeme from falling on the ground as in Figure 3. Figure 3 STEP 4: The ball joint systeme can be adjusted 360° horizantally and 20° vertically. [. . . ]