User manual SANYO SRT-4040DC

[. . . ] i n d ex I INSTRUCTION MANUAL SRT-4040 SRT-4040DC English Français Español Real Time Video Cassette Recorder Magnétoscope en temps réel Videograbador en tiempo real Please read this manual and accompanying "IMPORTANT SAFETY INSTRUCTIONS" sheet carefully before connecting your VCR and operating it for the first time. Be sure to read carefully and follow all the PRECAUTIONS on page 1 and 2. Keep the manual in a safe place for future reference. PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] oe If the recording speed mode is "000", the recording will be in 8-hour mode irrespective of the alarm recording speed mode setting. 3 Press the l (or j) button until the "MODE" setting is highlighted, then press the ENTER button. 4 Press the l (or j) button to set the desired alarm recording mode, then press the ENTER button. Alarm recording is done when there is an alarm trigger. Alarm recording is done only when there is an alarm trigger during duration of programmed timer recording. Alarm recording is done only if there is an alarm trigger and the VCR is not in programmed timer recording mode. Alarm recording is done only when there is an alarm trigger during programmed timer recording duration. VCR comes on records only for alarm duration. Alarm recording is not performed even if there is an alarm trigger. 5 Press the ENTER button. English 25 ALARM RECORDING Alarm Recording Reset Function To stop the recording of an alarm, close the connection between the ALARM RESET IN terminal and the COM terminal during alarm recording. Checking the Alarm Recordings Time 1 Press the MENU button to display the MAIN MENU. 2 Press the l (or j) button to select the "9. OTHERS" line, then press the ENTER button. ø The (OTHERS) menu appears. <OTHERS> *ALARM@LOG *POWER@FAILURE/DEW *TERMINAL@SETSET1 Alarm Recording Counter Display oe During alarm recording, "AL" and "A" will be flashing on the digital display. oe If a superimpose display is being displayed and "ALARM COUNT" has been set to "Y" in the (DISPLAY/SW OUT SET) menu, the number of alarm recordings will flash on the monitor screen. oe The maximum display number of alarm recordings is "999". At the next alarm recording the counter will indicate "000". oe When the (ALARM LOG) menu appears, press the MENU RESET button to reset the alarm counter to "000" (all the data of the (ALARM LOG) menu is reset). 3 Press the l (or j) button to select the "ALARM LOG" line, then press the ENTER button. ø The number of alarm recordings, and the 10 most recent alarm recording times are displayed. @10-18@12:00 Connections to the ALARM IN Terminal oe Alarm input signal Connect a make-contact (no voltage) switch between the ALARM IN and COM terminals. oe Continue pressing the l (or j) button to display the next (or previous) 10 alarm recording entries. When the number of alarm recording entries reaches 100, the older ones are erased as new ones are memorized. 4 Press the MENU EXIT button. NOTE: oe If the MENU RESET button is pressed while the (ALARM LOG) menu is displayed, the displayed data is erased. "AL" will be erased from the digital display. 26 English ALARM RECORDING Alarm Search To go to the beginning of a desired alarm recording. Alarm Scan To look for an alarm recording by viewing the first 5 seconds of each alarm recording. 1 Press the SEARCH button during stop mode. ø "AL SEARCH 01" appears on screen. 1 Press the SEARCH button twice during stop mode. ø "AL SCAN" will be displayed on screen. 2 Press the l (or j) button to set the desired alarm number (01 to 99), then press the FF (or REW) button. ø The desired alarm is searched for and a still image of the beginning of the alarm recording appears on-screen. 2 Press the FF (or REW) button. ø The unit will advance (or rewind) the tape at high speed and playback the first 5 seconds of every alarm recording. ø To cancel the alarm scan mode, press the STOP button. NOTE: oe The alarm number is relative to the actual tape position. (Please refer to the illustration below. ) Playback Alarm number 2 Alarm trigger input point Rewind direction Fast-forward direction 1 1 2 3 While the desired recording is being played back, press the PLAY button. ø Playback starts and alarm scan mode is canceled. NOTES: oe If the end of the tape is reached during a scan, the tape will rewind and stop. [. . . ] The cassette tape cannot be ejected The cassette is ejected a few seconds after it has been inserted After a Power Failure If the recording speed is reset to 8-hour mode after a power failure, it is due to insufficient backup battery charge. This is not a malfunction. System Down If the unit does not function at all, try the following. 1 Unplug the power cord then plug it back in. (Press the ALL RESET button. Under normal conditions, do not touch the ALL RESET button. ) The time and date will be reset, and the security lock will be canceled. 3 If the problem is not corrected after performing steps 1 and 2 a few times, consult your dealer. 50 English SPECIFICATIONS General Specifications Video head system Dual-azimuth 4-head rotating helical scanning system: Dual azimuth 2-head for record and standard playback Dual azimuth 4-head for forward picture search, reverse picture search and still mode In 8-, 24- and 40-hour modes (when using T-160 tape) In 6-, 18- and 30-hour modes (when using T-120 tape) 11. 12 mm /sec (8-hour mode) VHS 1/2 inch video cassette tape 8, 24 and 40 hours (when using T-160 tape) 6, 18 and 30 hours (when using T-120 tape) approximately 2 minutes 35 seconds (when using T-160 tape) approximately 2 minutes (when using T-120 tape) NTSC color TV system Audio recording Tape speed Specified video cassette tape Recording/playback time Fast forward/rewind time Television system Video Recording method Video input Video output Horizontal resolution Luminance signal: FM recording Chrominance signal: Down-converted direct recording 1 V(p-p), BNC, 75 , unbalanced 1 V(p-p), BNC, 75 , unbalanced Black & white mode 350 line or more Color mode 300 line or more Audio Input Output ­8 dBs, RCA pin jack, 27 k, unbalanced ­8 dBs, RCA pin jack, 600 , unbalanced Connectors No voltage, make-contact switch input (Low input 100ms or more, Normally 5 V) Control input Key code (pulse signal) (Normally 5 V) Series input No voltage, make-contact switch input (Low input 1s or more, Normally 5 V) Ext timer (alarm reset) input No voltage, make-contact switch input (Low input 100ms or more, Normally 5 V) Common 0 V (GND) Warning output Open collector Max. 500 mA (Active Low 0 V, Normally open) Control output Key code (pulse signal) (Normally 5 V) Tape end output Open collector Max. [. . . ]