User manual SANYO VPC-CG10BK

[. . . ] INSTRUCTION MANUAL Dual Camera VPC-CG10EX VPC-CG10 VPC-CG10GX Important note This manual explains how to safely operate the VPC-CG10EX, VPC-CG10 and VPC-CG10GX. Any information regarding only one of these products will be labeled as such. Please read these instructions carefully before using the camera. Make sure to read and understand the separate booklet "SAFETY MANUAL". [. . . ] If you press the REC/PLAY button while editing video clips, not only will the editing not be properly completed, but the original video clip may also be erased. i As the number or size of the video clips increases, the card memory may become full, making it impossible to edit or save the video clips. In this case, you will need to free some of the memory on the card by deleting files that are no longer necessary (pages 53 and 76). Regarding the capture date of the saved files i The capture date of edited images changes to the date that the files are saved. NORMAL/PLAYBACK English 106 PLAYBACK MENU 2 Video clip cutting (extracting) 1 2 Display the video clip from which you wish to extract a segment. Display the NORMAL Mode Playback Menu (page 38), select "EDIT VIDEO", and press the SET button. EDIT VIDEO CUT JOIN OK 3 Select "CUT" and press the SET button. h The Cutting Screen appears. Start point CUT 00:00:10 / SAVE 107 English 4 Specify the start point of the extract. h Use the procedure below to specify the frame from which the video clip extract will start. h Play the video clip until approximately the desired point, pause the video clip, then play the video clip one frame at a time, stopping at the start point of the extract. This will be the first frame of the extract. h If the start point of the video clip is also the start point of the extract, proceed to step 5. <Procedure> Play: After pausing playback, press and hold the SET button to the right for about 2 seconds for forward playback, or to the left for reverse playback. Pause: During playback, press the SET button. Accelerated playback: During playback, toggle the SET button to the left or right to change the playback speed. Single frame: After pausing playback, toggle the SET button to the right to move forward one frame, or to the left to move back one frame. NORMAL/PLAYBACK English 108 PLAYBACK MENU 2 5 Toggle the SET button up. h The start point of the video clip extract is set, and the screen to specify the end point appears. h Specify the end point of the extract by following the same procedure as in step 4. <When joining the first and latter portions> 1 Toggle the SET button down. h Each time the SET button is toggled down, the sections to delete and the sections to save are reversed. The frame following the end point of the extract will be the start point of the latter portion to be joined. Approximate playback time CUT 00:00:06 / SAVE End point Portion to be deleted 109 English 6 Press the [O/ ] button. h A screen appears for you to select either to save the edited video clip as a new (separate) file, or to delete the original video clip and replace it with the edited video clip. SAVE AS NEW: The edited video clip will be saved as a new file. The original video clip remains unchanged. [. . . ] NOTE i If the background is distracting, it will not show your subject to his best advantage. Move in closer to your subject or zoom in so that the background does not compete with the subject. i In portrait photography your subject is clearly the central figure, so try techniques that allow the subject to stand out. i If light is coming from behind your subject (backlit), his face will appear dark. [. . . ]