User manual SANYO VPC-SX550EX

[. . . ] Keep this manual in a safe place for later reference. Warning TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE FOR AMERICAN USERS oe This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] oe The screen corresponding to the exposure control mode selected in step 2 appears. <Aperture and shutter variable program AE Ï> oe The setting changes to aperture and shutter variable program AE, and you are returned to the Shooting Setting Screen. <Aperture priority AE Î> oe The display to set the aperture size appears. oe Press [j] or [l] on the arrow button to set the desired aperture size. Tele: 4. 9 to 11. 8 Wide: 2. 7 to 6. 7 APERTURE j 2. 7 l SETTING 12 p <Shutter speed priority AE Ì> oe The display to set the shutter speed appears. oe Press [j] or [l] on the arrow button to set the desired shutter speed. to 1/2500 sec. SHUTTER j p 12 1/100 l SETTING English 108 <Manual exposure control Í> oe The display to set the aperture size and shutter speed appears. oe Press [d] or [c] on the arrow button to select aperture size \ or shutter speed ä, and press [j] or [l] on the arrow button to change the setting. Setting range: Aperture \: 4. 9 to 11. 8 (Tele) 2. 7 to 6. 7 (Wide) Shutter speed ä: 16 sec. to 1/2500 sec. MANUAL j p 12 2. 7 l 1/100 SELECT SETTING 4 Press the SET button. oe This completes the exposure control setting. ì: Set the green hue, saturation and brightness. û: Set the cyan hue, saturation and brightness. î: Set the blue hue, saturation and brightness. Í: Set the magenta hue, saturation and brightness. C: The new settings are canceled, and you are returned to the Color Adjustment Screen. HUE 00 00 00 00 00 00 SAT 00 00 00 00 00 00 BR 00 00 00 00 00 00 English 112 ADJUSTING THE COLOR TONES (REAL-COLOR EQUALIZER) 4 Adjust the color. 1 Press [j] or [l] on the arrow button to select a color icon (í to Í) to adjust. 2 Press [d] or [c] to select the color property you wish to change (hue, saturation or brightness). 3 Press [j] or [l] to adjust the value of the selected color property. oe Adjust the hue while watching on the LCD monitor. oe Each property can be set within a maximum range of +50 to ­50. oe To change the settings for other colors, press [j] or [l] to select another color, and then repeat steps 2 to 4. HUEj l SAT pM- +15 +Y 00 BR 00 SELECT SETTING The characters to the left and right of the hue setting value indicate the color change. [. . . ] If the camera is used when the internal temperature is elevated, it is more likely for the S icon (warning indicator for elevated temperature) to appear, and the usable time of the camera to become shorter. (See "Cautions concerning high temperatures" on page 24. ) Cautions when using the Microdrive oe When using the Microdrive continuously, the card will become very hot. Be careful when touching the card for removal, etc. oe When using the Microdrive, it will take a few seconds after the digital camera is turned on before the card can be used. [. . . ]