Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SCANSONIC P2500. We hope that this SCANSONIC P2500 user guide will be useful to you.
Lastmanuals help download the user guide SCANSONIC P2500.
Detailed instructions for use are in the User's Guide.
[. . . ] Mode Switch - CHARGE – In this position the battery charge is activated. - OFF – In this position the radio is turned off. - FM – In this position the FM band is switched on. [. . . ] Prior to battery operation make sure that battery has been fully charged. Disconnect the power adaptor from main socket when not using the unit. Switch on the unit by turning the Mode Switch to FM or AM. Now the orange backlight at the Frequency Window will glow. Adjust to the desired station in the selected band by rotating the Frequency Tuner to the frequency and fine tune to best reception. Turn the Mode Switch to OFF to switch of the unit. Plug in the power adaptor into the AC/DC input socket at the back of the unit and then connect to AC main socket (AC 230V-50Hz). Red light in the LED indicator will flash when batteries are charged. Green light in the LED indicator will glow after full charging. Unplug the power supply when LED is green. 8 hours) the unit can be operated for approximately 7-8 hours by DC at 50% volume output. Note that the radio reception becomes weak and the sound may be distorted when the battery requires recharge. Plug in the power adaptor into the AC/DC input socket at the back of the unit and then connect to AC main socket (AC 230V-50Hz). Switch on the unit by turning the Mode Switch to FM or AM. Red light in the LED indicator will flash when battery is being charged. Green light in the LED indicator will glow after full charging. Unplug the power supply when LED is green. 8 hours) the unit can be operated for approximately 7-8 hours by DC at 50% volume output. [. . . ] In case of condensation wait 1 or 2 hours before using the unit. Do not attempt to service this product yourself. Specifications and design are subjects to changes without notice. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SCANSONIC P2500
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SCANSONIC P2500 will begin.
