User manual SCOTT DRX 630

[. . . ] Be sure to connect the color-coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle’s electrical system. Be sure to connect the speaker leads to the speaker terminal using the correct polarity. Never connect the left and right channel speaker cables to each other or to a metal part of the vehicle. [. . . ] Program Type Briefly press the ANGLE button (7) to activate the PTY function. When this function is on, press the and buttons to select your desired item, after that, press and hold ANGLE to start PTY searching or press ANGLE then it will start automatically after 3 seconds. Note: * * * This function can only be carried out with the remote control . Briefly press OSD button (8) on the remote control to show the setup information before setup. The ANGLE button for this function is activated only in FM RDS mode. RADIO MENU Press the SET UP button (19) on remote control, the display shows the radio setup menu, Use the / / / buttons on the remote control (27) to select your desired item, then press ENTER on the remote control to confirm. Press / / / to select EXIT, then press ENTER to exit the setup or simply press SETUP button again to exit. Note: * This function can only be carried out with the remote control. Playing a disc/USB device Play disc: Press PWR button to turn on the unit and then press RELEASE button to release the front panel. Then, insert a disc (with label side up) into the disc loading slot and close the front panel. Play USB device: firstly open the rubber cover, then insert USB device with supplied USB cable if necessary in USB port, it will automatically start playback. If it contains folders, at STOP mode, use the or buttons (21) to select the required folder. Then select the desired file using the or buttons. if USB is inserted , press SOURCE button to select the DVD mode. * You can eject the disc by using RELEASE button to open the front panel and then pressing the button on the main unit. Quick track selection Play MP3/MPEG-4 files: At STOP mode, press the press ENTER to play; During VCD/CD/MP3/MPEG-4 playback, press the Note: or or button on the remote control to go to the next or previous track and then button on the remote control to play the previous or next track. * The and button on the main unit performs the same function. Repeat Playing During playback , press RPT button(15) on the remote control to replay the current track. Note: * Press AMS button(6) on the main unit can be used to operate repeat play. Number Buttons During playback, you can select any track directly by using Number buttons (23). The selected track will be played automatically. Note: * This function can only be operated using the remote control. [. . . ] If you set it OFF, this source is invalid. During playback mode, you cannot set it OFF. no te : * RADIO mode can’t be set OFF GB-43 DVD ON/OFF AUX IN ON/OFF 5．PREFERENCE SETUP Select PREFERENCE in main menu , then press ENTER to access. Turning on or off the DVD mode can be set In this menu, the default setting is ON. [. . . ]