User manual SCOTT SCALE CARBON

[. . . ] 016 2 2011 SCOTT BIKE OWNERS MANUAL SCALE CARBON CONCEPT Scale is the result of research and development based on the feedback of the ScottSwisspower Racing Team searching for one of the lightest cross country racing frames in the market. Scott's focus was not only on lightweight but also on a stiff and easy to handle racing frame. GEOMETRY SCALE SCALE CARBON A Size Head angle ° B Head tube length C Effective top tube horizontal D Seat angle ° E BB center to top of seattube F BB center to top tube center G Chainstay length H BB offset I Standover height Stem length mm Crankarm length mm mm inches mm inches mm inches mm inches mm inches mm inches mm inches SCALE 26" S M L XL 70. 0° 70. 0° 70. 0° 70. 0° 110 120 135 160 4. 3 4. 7 5. 3 6. 3 555 585 610 21. 9 23. 0 24. 0 73. 5° 73. 5° 73. 5° 73. 5° 390 440 480 15. 4 17. 3 18. 9 324 374 414 464 12. 8 14. 7 16. 3 18. 3 420 420 420 420 16. 5 16. 5 16. 5 16. 5 -30 -30 -30 -30 -1. 2 -1. 2 -1. 2 -1. 2 733 765 792 830 28. 9 30. 1 31. 2 32. 7 90 90 100 110 170 175 175 175 SCALE CARBON 640 25. 2 530 20. 9 SCALE 29" M L XL 69. 5° 69. 5° 69. 5° 105 115 125 4. 1 4. 5 4. 9 600 23. 6 620 24. 4 640 25. 2 72. 5° 72. 5° 72. 5° 440 480 17. 3 18. 9 375 415 465 14. 8 16. 3 18. 3 438 438 438 17. 2 17. 2 17. 2 -60 -60 -60 -2. 4 -2. 4 -2. 4 760 810 29. 9 31. 9 175 175 175 530 20. 9 860 33. 9 4 2011 SCOTT BIKE OWNERS MANUAL 5 ENGLISH TECHNICAL DATA SCALE Seatpost diameter Seattube clamp SCALE CARBON Headtube diameter Fork travel Fork length BB housing Rear Hub Width Max tire width Chainring size 34. 9mm 38, 2mm, some models with integrated seatclamp 1 1/8" /1. 5", tapered, cups semi-integrated, 50-61mm cup OD 100mm 471mm PF BB 92, PF BB 30 135mm 57. 0mm/2, 25" Min. 45T PFBB30hasahousingwidthof73mmwithaninnerdiameterforthecartridges of46mm. BB STANDARDS / FD MOUNTING DETAILS Scale is available with 2 different Bottom Bracket systems. [. . . ] Remove the clip-in BB Guide in the BB housing 2. Push the inner cables from the front downward inside the downtube to the BB housing. Please make sure to follow the cable routing as shown below: 3. Pull them out on the related holes (RD on right side, FD on left side) on the BB housing. Rear derailleur Front derailleur Please note that the outer housing of the FD and RD cables will stop at the cable stop/ port on the front end of the down tube. 4. Push them through the related holes on the BB Guide and clip the BB Guide into the BB housing ENGLISH 5. Follow the standard set up and assembly instructions of the shifting system manufacturer for final adjustment of the shifting system 10 2011 SCOTT BIKE OWNERS MANUAL 11 SCALE CARBON SEATTUBE CLAMP Scale Carbon features two different versions of the seatpost fixation on the seattube. SCALE CARBON REPLACEABLE REAR DERAILLEUR HANGER Scale Carbon is using the same replaceable rear derailleur hanger as Scott Spark and Genius. This spare part can be ordered via the Scott distribution with article number 206473. Integrated clamp type: This fixation shaves off approx. 15 grams in comparison to a regular seattube clamp. Pleasenotethemaximumtighteningtorqueonthefixingboltof5Nm/44in/lbsto avoiddamagesonframe, clamppartsortheseatpost. Please make sure to use always the washer between the 2 clamp parts to avoid damages on the frame, seatpost or clamp mechanism. seatclamp M5 nut seatclamp washer seatclamp nut seatclamp M5 screw SCALE CARBON 13 ENGLISH Standard type: Please make sure to only use a seatclamp with an inner diameter of 38. 2mm and please note the maximum tightening torque on the fixing bolt of 5Nm/44 in/lbs 12 2011 SCOTT BIKE OWNERS MANUAL REAR DISC BRAKE MOUNT The rear disc brake on Scale Carbon is Postmount (PM) Standard on the left chainstay and optimized for 160mm/6" rotors, so the calliper can be mounted directly without adapters on the Postmount fixation. Please note Scale Carbon is designed for disc rotors between 160mm/6" and 185mm/7" (adapter needed from manufacturer of the brake)only. FRONT FORK SET-UP/ CHANGE OF FRONT FORK: For the set up of the front fork please use the fork specific manual attached to the bike. We recommend using front forks with distance of 471mm/18. 54" between mid of axle to top of crown, as this will not influence the geometry and alter handling of the bike. SCALE CARBON 15 ENGLISH SCALE CARBON 14 2011 SCOTT BIKE OWNERS MANUAL WARRANTY WARRANTY SCOTT bikes are made using the most innovative production and quality methods. They are equipped with best components of well known parts suppliers. SCALE CARBON Model Year Size This warranty of 5 years for the frames shall only be granted in case once a year a maintenance service has been effected according to maintenance requirements as set forth in this manual by an authorised SCOTT dealer. The authorised SCOTT dealer shall confirm the effected annual maintenance service by stamp and signature. Frame In case such an annual maintenance service has not been effected the warranty of 5 years for the frame shall be reduced to 3 years. Costs for maintenance and service have to be born by the owner of the SCOTT bike. [. . . ] In principle, this warranty is granted worldwide. Claims must be made through an authorized dealer, for information regarding the nearest dealer, write or call this company or the national SCOTT distributor. Normal wear, accident, neglect, abuse, improper assembly, improper maintenance by other than an authorized dealer or use of parts or devices not consistent with the use originally intended for the bicycle as sold are not covered by this warranty. [. . . ]