User manual SCOTT SRX 210

[. . . ] Do not expose to any water or to a very humid environment. Do not operate the unit when your hands are wet as this may cause a short circuit. For safe driving, keep the volume low in order to concentrate on traffic conditions. Do not clean the unit with alcohol, only clean with a soft dry cloth. [. . . ] - To store a station: - Select a band (if needed) - Select a station by or buttons , refer to auto / manual tuning. - Hold a Preset button ( 1 - 6 ) for at least 2 seconds. In case of RDS mode, the strongest AF is selected after AF searching. Auto store / Preset scan - Preset scan: Press the AMS button to scan each preset station. If the field strength level is more than the threshold level, the radio will hold at this preset station for 5 seconds with sound output, then go to next station until all 6 FM stations are scanned, finally the radio will play at the preset station where scanning started. The preset station number on the LCD will flash during the process. Press the AMS again to stop preset scan. GB-14 - Auto store: Press the AMS button for more than 2 seconds to start auto store. The radio will scan from the lowest frequency, and automatically store the 6 strongest stations into the preset memories. When auto store is complete, the radio will start a preset scan of the 6 stations which it has just stored. rDS (Radio Data System) Operations The RDS data are the PI , PS , TP , PTY , TA and AF data. When TA mode is on, the unit automatically broadcasts available traffic announcements. To interrupt a traffic announcement without switching off the TA mode, briefly press the TA button. The radio will then return to the previous operating mode. hold down the TA button to select “EON TA LOCAL” (EON local stations) or “EON TA DX” (EON distant stations). If you select “EON TA LOCAL”, only traffic announcements from stations with strong signals will be emitted. If you select “EON TA DX”, all traffic announcements received will interrupt disc mode, AUX in mode or radio mode. GB-16 CD/MP3/WMA Disc Operations Press the MODE button to select the disc mode. Press the OPEN ( ) button on the front panel to flip down the front panel and then insert a disc into the disc slot with the printed side facing upward; and close the front panel, the player will play the disc automatically. To eject the disc, press the OPEN ( ) button to open the front panel and then press the EJECT ( ) button. Playing/Pausing - During playback, press the button to interrupt the playback. Playing the previous/ next track - During playback, press the button to play the next track. [. . . ] - Do not place stickers or make scratches on discs. - A disc should always be kept in its case when not in use to prevent from damage. - Do not place discs in the following places: 1. Disc Cleaning Use a dry soft cloth to wipe the surface. [. . . ]