User manual SEGA AIRLINE PILOTS

[. . . ] 1st PRINTING MAY 00 STD TYPE OWNER'S MANUAL SEGA ENTERPRISES, INC. 4200-6479-01 Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. [. . . ] to check Volume value display variation. To check CHUTE 1 & CHUTE 2 coin switches, open the COIN CHUTE DOOR and insert a coin(s) in the slot. Simultaneously pressing the TEST BUTTON and the SERVICE BUTTON returns to the test menu. PRESS TEST AND SERVICE BUTTON TO EXIT B. OUTPUT TEST Select OUTPUT TEST to cause the following screen to appear, and allows the status of each lamp to be checked. In this mode, periodically check the lamp status. OUTPUT TEST START BUTTON LAMP LANDING GEAR UP LAMP LANDING GEAR DOWN LAMP FLAP UP LAMP FLAP DOWN LAMP VIEW CHANGE BUTTON LAMP OFF OFF OFF OFF OFF OFF Select the item with the SERVICE button and press the TEST button to alternate the display to and from ON and OFF. Outputting corresponds to the ON/OFF alternation. When exiting from OUTPUT TEST with ON display, all of ON displays change to OFF. Bring the arrow to EXIT and press the TEST BUTTON to return to the menu mode. -> EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON C. SOUND TEST This test mode allows each sound used in the game to be checked. SOUND TEST No. 0 Press the SERVICE button to increase the number sequentially, emitting the next sound to be tested. Press the TEST button to return to the TEST MENU. SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT D. test causes the monitor to display the following and allows the 3 screens (displayed simultaneously) to adjust brightness balance. C. R. T. GAME ASSIGNMENTS Selecting the GAME ASSIGNMENTS in the MENU mode causes the present game settings to be displayed and allows game setting changes (game difficulty, etc. ) to be made. After setting changes, be sure to exit from the TEST mode; the settings are not renewed until the TEST mode is exited. SETTING CHANGE PROCEDURE 1 2 3 Press the SERVICE BUTTON to move the "->" to the desired item. Change to the desired setting by using the TEST BUTTON. To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON. GAME ASSIGNMENTS GAME DIFFICULTY (TRAINING) NORMAL GAME DIFFICULTY (FLIGHT) NORMAL -> EXIT GAME DIFFICULTY (TRAINING) Sets the game difficulty for the TRAINING Mode. Game difficulty can be set from among the 5 categories, i. e. , VERY EASY, MEDIUM EASY, NORMAL, MEDIUM HARD, and VERY HARD. Specifically, this varies the qualifying points in the TRAINING Mode. GAME DIFFICULTY (FLIGHT) Sets the difficulty for the FLIGHT Mode. Game difficulty can be set from among the 5 categories, i. e. , VERY EASY, MEDIUM EASY, NORMAL, MEDIUM HARD, and VERY HARD. Specifically, this varies the initial time for each course in the FLIGHT Mode. SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT F. [. . . ] APC-1550 APC-1560 DYN-1032 000-P00408-W DESCRIPTION COVER PANEL L ASSY SPEAKER L MASK BRKT M SCR PH W/FS M4 X 8 14 ASSY SPEAKER L (APC-1560) ITEM NO. APC-1561 130-5156 000-P00512-W DESCRIPTION SPEAKER BRKT SPEAKER BOX 8OHM 20W M SCR PH W/FS M5 X 12 15 ASSY MONITOR COVER R (APC-1570) ITEM NO. APC-1571 APC-1565 DYN-1032 000-P00408-W DESCRIPTION COVER PANEL R ASSY SPEAKER R MASK BRKT M SCR PH W/FS M4 X 8 16 ASSY SPEAKER R (APC-1565) ITEM NO. APC-1561 130-5156 M SCR PH W/FS M5 X 12 DESCRIPTION SPEAKER BRKT SPEAKER BOX 8OHM 20W M SCR PH W/FS M5 X 12 17 ASSY SEAT STD (APC-1600) 17 ASSY SEAT STD (APC-1600) ITEM NO. [. . . ]