User manual SEGA DREAMCAST HARDWARE BROADBAND ADAPTER

[. . . ] Always use two hands when removing the modem. q Although the modem is attached somewhat firmly to the Dreamcast, never use a screwdriver or other implement to forcibly pry the modem off. q After removing the modem, store it in a safe place for future use. [. . . ] Dust on the connectors could result in incorrect operation due to a poor connection. [Miscellaneous] q After opening the transparent pack that the Broadband Adapter is packaged in, dispose of the pack. FCC Warning This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any inter ference that may be received, including interference that may cause undesired operation. Once the modem has been removed, refer to the diagram and insert the Broadband Adapter. Press firmly on the Broadband Adapter until it snaps into place and its edges are flush with the Dreamcast. 3 Plug in the Ethernet cable q After the Broadband Adapter is installed, an Ethernet cable (purchased separately) must be connected. Refer to About the Ethernet Cable for details about the type of cable to use. q Ensure the orientation of the connector is correct and then insert the Ethernet cable connector into Broadband Adapter until it clicks into place. Ethernet cable 4 Installation complete Installation of the Broadband Adapter is complete. Connect a Dreamcast controller, and other peripheral devices as desired, and the power cable. To use the Broadband Adapter, place a Broadband Adapter supporting game or application into the Dreamcast and turn the power on. Please refer to the game or application users manual for specific details about network connection and operation. BAdapter_MA 1/11/01 12:07 PM Page 2 About the Broadband Adapter Although the Broadband Adapter and the modem are identical in shape when viewed from the side, the cable connectors are different. In addition, the cable connector on the modem is labeled "LINE", while the cable connector on the Broadband Adapter is labeled "LAN". Troubleshooting Before contacting Sega or requesting service, please check the following: 1. Are you using the phone cable instead of an Ethernet cable?Is the Ethernet cable firmly connected to both the Dreamcast and your Ethernet equipment?Is the Broadband Adapter correctly and securely connected to the Dreamcast? [. . . ] If your service provider does not specify a particular cable type Sega recommends that a category 5 UTP (Unshielded Twisted Pair) or STP (Shielded Twisted Pair), 2-pair (4-wire) cable be used. q Ensure that the Ethernet cable is connected to the Ethernet equipment as specified by your service provider. Detailed View of the Cable Connectors Sega of America Dreamcast, Inc. P. O. Box 7639 San Francisco, CA, 94120-7639 1-800-USA-SEGA & www. sega. com · Please note that specifications and product exterior may change without notice. [. . . ]