User manual SEGA GHOST SQUAD UR

[. . . ] Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary. Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially hazardous degrees, the terms of WARNING, CAUTION, etc. Be sure to understand the contents of the displays before reading the text. [. . . ] The lower the NODE number, the further away the node is from the Chihiro. Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen. www. sauservice. com 68 INPUT TEST Screen JVS TEST INPUT TEST NODE 1/1 SYSTEM 00 PLAYER 1 0000 PLAYER 2 0000 COIN 1 0000 COIN 2 0000 ANALOG 1 0000 ANALOG 2 0000 ANALOG 3 0000 ANALOG 4 0000 ANALOG 5 0000 ANALOG 6 0000 ANALOG 7 0000 ANALOG 8 0000 PRESS TEST AND SERVICE BUTTON TO EXIT (A) (A) (A) (B) (B) (C) (C) (C) (C) (C) (C) (C) (C) On-screen values change according to the input from switches and the volume. (A) (B) (C) SYSTEM, PLAYER Values change with input from control panel/other switches. COIN Increases with input from the COIN SWITCH. The count is cleared when exiting TEST MODE. ANALOG Displays analog values from "0000" to "FFFF". Press the SERVICE and TEST Buttons simultaneously to return to the JVS TEST main screen. 69 www. sauservice. com E. SOUND TEST Use SOUND TEST to test sound output and to select the stereo/mono/surround setting. SOUND TEST OUTPUT TYPE RIGHT SPEAKER LEFT SPEAKER EXIT STEREO OFF OFF (A) (B) (B) SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button to enter the selected item. (A) OUTPUT TYPE(STEREO, MONO, SURROUND) Select the sound output from the I/O PANEL audio output interface setting among STEREO, MONO and SURROUND. RIGHT/LEFT SPEAKER(ON, OFF) When set to "ON", the test sends a beep to each audio output interface. Only the word "SPEAKER" is displayed when the OUTPUT TYPE is set to "MONO", and when set to "ON", the test sends the same beep to both the left/right audio output interfaces. The "x COIN(S) COUNT AS y CREDIT(S)" setting indicates that "Inserting x coins equals y credits". Set this to "FREE PLAY" to allow game play without credits. When (A) COIN CHUTE TYPE is set to "COMMON", COIN CHUTE #2 settings are restricted to some extent by the settings for COIN CHUTE #1. DETAIL SETTING This mode allows for more detailed credit rate settings than the (C) COIN TO CREDIT RATE setting. Changes made in DETAIL SETTING override any (C) COIN TO CREDIT RATE settings. (D) DETAIL SETTING Screen COIN ASSIGNMENTS DETAIL SETTING COIN CHUTE #1 MULTIPLIER 1 COIN COUNT AS 1 COIN(S) COIN CHUTE #2 MULTIPLIER 1 COIN COUNT AS 1 COIN(S) BONUS ADDER NO BONUS ADDER COIN TO CREDIT 1 COIN(S) 1 CREDIT EXIT COIN CHUTE #1 OPERATION COIN 1 2 3 4 5 6 7 8 9 CREDIT 1 2 3 4 5 6 7 8 9 COIN CHUTE #2 OPERATION COIN 1 2 3 4 5 6 7 8 9 CREDIT 1 2 3 4 5 6 7 8 9 SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON (E) (E) (F) (G) COIN ASSIGNMENTS DETAIL SETTING COIN CHUTE #1 MULTIPLIER 1 COIN COUNT AS 1 COIN(S) BONUS ADDER NO BONUS ADDER COIN TO CREDIT 1 COIN(S) 1 CREDIT EXIT COIN CHUTE #1 OPERATION COIN 1 2 3 4 5 6 7 8 9 CREDIT 1 2 3 4 5 6 7 8 9 SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON COIN CHUTE TYPE. . . COMMON COIN CHUTE TYPE. . . INDIVIDUAL (E) COIN CHUTE MULTIPLIER Use this to set how many coins will be counted for each coin inserted. The "1 COIN COUNT AS x COIN(S)" setting indicates that "Each coin will be counted as x coins". When the (A) COIN CHUTE TYPE is set to "COMMON", the setting may be set individually for COIN CHUTE #1 and #2. BONUS ADDER Use this to set the number of coins calculated with the (E) COIN CHUTE MULTIPLIER setting that need to be inserted to get 1 bonus coin. When the (A) COIN CHUTE TYPE is set to "COMMON", the sum of the coins for COIN CHUTE #1 and #2 is used for the calculation. The "x COINS GIVE 1 EXTRA COIN" setting indicates that "For every x coins, 1 bonus coin is given". Set this to "NO BONUS ADDER" to disable bonus coins entirely. [. . . ] CTF-1340 CTF-1321 CTF-1322 CTF-1303 CTF-1002 FAS-290037 FAS-120031 DESCRIPTION ASSY HOLDER LIGHT CONTROLLER HOLDER R CONTROLLER HOLDER PLATE R CONTROLLER HOOK WASHER CTF HEX SKT LH CAP SCR SCR STN M5X20 TAP SCR P-TITE TH BLK 4X16 NOTE 171 www. sauservice. com ASSY HOLDER LIGHT (CTF-1340) (D-1/2) www. sauservice. com 172 ASSY HOLDER LIGHT (CTF-1340) ITEM NO. 1 2 3 101 102 103 104 201 202 203 301 PART NO. CTF-1341 CTF-1342 CTF-1343 838-14463 280-5247 280-5248-5. 7 280-5275-SR10 050-U00300 060-F00300 000-P00316-W CTF-60027 DESCRIPTION HOLDER LIGHT COVER HOLDER LIGHT PLATE LED BD BRKT LED BAR BD GREEN ONE TOUCH BUSHING ONE TOUCH COLLAR M3 L=5. 7 CORD CLAMP SR10 U NUT M3 FLT WSHR M3 M SCR PH W/FS M3X16 WH HOLDER LED NOTE (D-2/2) 173 www. sauservice. com ASSY CONTROL PANEL (CTF-2000) ITEM NO. 1 2 3 4 5 6 101 102 201 202 203 204 301 PART NO. [. . . ]