User manual SEGA LOST WORLD DELUXE TYPE

[. . . ] 1ST PRINTING-AUG TM OWNER'S MANUAL SEGA ENTERPRISES, USA MANUAL NO. 4201-6325-02 Warranty Your new SEGA product is covered for a period of 90 Days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. [. . . ] The function of each switch is as follows: 1 SOUND VOLUME Controls the speaker volume. TEST BUTTON (TEST SW) For the handling of the TEST BUTTON, refer to the section on test mode. SERVICE BUTTON (SERVICE SW) Gives credits without registering on the coin meter. Cover COIN METER 2 3 Test Service SHAKER FIG. 6. 1 Volume Front Volume Rear 23 6 - 2 TEST MODE In case settings are changed in GAME ASSIGNMENTS, COIN ASSIGNMENTS, and GUN SETTING, the setting changes are not effective unless the test mode is exited and the game mode returns to the screen. The setting changes are ineffective if the power is turned off in the test mode. This mainly checks if the operation of the Game BD is accurate, and allows for COIN ASSIGNMENTS/GAME ASSIGNMENTS setting and Projector adjustments. SELECTION OF TEST ITEMS 1 Push the TEST BUTTON to cause the following TEST MENU to appear: By pushing the SERVICE BUTTON, bring the arrow mark to the desired item and press the TEST BUTTON. After the test is complete, move the arrow mark to "EXIT" and press the TEST BUTTON to return to game mode. 2 3 6 -3 MEMORY TEST The MEMORY TEST mode is for checking the on-BD memory IC functioning. "GOOD" is displayed for normal ICs and "BAD" is displayed for abnormal ICs When the test is completed, if the display is as shown left, it is satisfactory. After finishing the test, pressing the TEST BUTTON allows the MENU MODE to return on the screen. 24 6 - 4 INPUT TEST When INPUT TEST is selected, the MONITOR will show the following, allowing you to watch the status of each switch. On the screen, periodically check the status of each switch. By pressing each switch, if the display on the righthand side of the name of each switch changes to ON from OFF, the SW and the wiring connections are satisfactory. Open the COIN CHUTE DOOR and insert a coin from the COIN ENRTY to check the COIN CHUTE SW. In the INPUT test, pressing the TEST BUTTON causes the menu to return to the screen. 6 - 5 SOUND TEST This enables sound used in the game to be checked. Sound related memory and each speaker are checked. Press the SERVICE BUTTON to bring the arrow to the desired sound item to be tested. Pressing the TEST BUTTON causes the desired sound test to appear. Each time the SERVICE BUTTON is pressed, the numeral displayed on the screen counts up and sound is emitted. 25 6 - 6 C. R. T. TEST to cause the MONITOR to display the screen shown left, allowing MONITOR adjustment status to be checked. Periodically check the MONITOR adjustment status on this screen. The screen (1/2) enables color adjustment check to be performed. The color bar of each of the 4 colors, i. e. , red, green, blue, and white, is the darkest at the extreme left and becomes brighter towards the extreme right. Press the TEST BUTTON to shift to the next page (2/2). The screen (2/2) allows screen size and distortion to be tested. [. . . ] JPT-3203 JPT-3204 130-5156 DESCRIPTION SPEAKER COVER L SPEAKER COVER R SPEAKER BOX 8OHM 20W 61 ITEM NO. JPT-1081 JPT-1082 838-13145 DESCRIPTION MASK BASE IR COVER LED BD GUN SENSE 62 ITEM NO. JPT-1101 JPT-1102 200-5277 2000-5350 999-0276 200-5265 DESCRIPTION BRACKET PTV LID CONN PTV LENTICULAR SHEET FRESNEL SHEET LEXAN PROTECTOR SHEET ASSY PROJECTION DISPLAY JPT 63 64 ITEM NO. 1 2 3 4 5 6 7 101 102 201 202 203 204 205 PART NO. [. . . ]