User manual SEGA SPORTS JAM UNIVERSAL KIT

[. . . ] 00 Naomi GD-Rom System Universal Kit Kit Installation Instructions & Service Manual Switchable FROM High Resolution 31K TO Standard (Low) Resolution 15. 75K. 2 PLAYER GAME (2) 8-Way Joystick per player (2) Action Buttons per player (1) Start Button per player for a Horizontal Monitor Kit come with one (1) JVS/JAMMA Interface Board for two (2) Player Action. SEGA ENTERPRISES, INC. 999-1118 Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. [. . . ] This game is available only with the NAOMI GD-ROM system. It is not available with other hardware. This game cannot support the competitor connection kit of the NAOMI CABINET. When connecting the wire to the control panel, therefore, connect it only to a single I/O board. 9 1. HANDLING PRECAUTIONS To prevent electric shock or IC Board malfunctioning, be sure to turn off the power for the cabinet when installing or removing the IC Board. Extraneous matter such as dust on the IC Board can cause the IC Board to generate heat and result in a fire due to short circuit, etc. Ensure the IC Board surfaces are always kept clean. Use NAOMI for the cabinets compatible with JVS. Using NAOMI for the cabinet other than those compatible with JVS can cause generation of heat and a fire. STOP Be sure to connect the IC Board and connectors completely. Insufficient insertion can damage IC Board, etc. For the IC Board circuit inspection, only the use of Logic Tester is permitted. The use of ordinary testers is not permitted as these can damage the IC Board. Do not subject the IC Board to static electricity when installing the IC Board in the cabinet or when connecting wire harness connectors to the IC Board. to the wire harnesses, be sure to remove the wire harnesses from the IC Board so as not to subject the IC Board to heat. Using NAOMI without the Shield Case can cause electric wave trouble. Be sure to use NAOMI together with the accessory Shield Case. The monitor frequency corresponding to NAOMI is 15kHz or 31kHz. NAOMI can not be used for the cabinet incorporating a monitor or projector not corresponding to 15kHz or 31kHz. Concerning the display of JAMMA VIDEO STANDARD: JAMMA VIDEO STANDARD adopted by NAOMI is referred to as JVS. As against this Standard, the conventional JAMMA STANDARD which employs 56P Edge Connectors adopted by ST-V, etc. The specific Manual attached to each game sometimes displays JVS as JV STANDARD, New JAMMA STANDARD, or JAMMA 2 STANDARD AGAINST OLD JAMMA STANDARD as JAMMA STANDARD, JS, etc. The contents herein described are subject to change without notice. IMPORTANT 10 2. SPECIFICATIONS 1 ON-SCREEN DISPLAY Monitor Position HORIZONTAL 2 CONTROL PANEL Synchronous Frequency 15/31 kHz 8WAYS SW2 1P SW1 START SW 2P 8WAYS SW2 SW1 PLAYER 1 PLAYER 2 3 Minimum DIMM Memory Capacity 256 MB 11 3. [. . . ] To clear the coin and credit data, select and execute the BACKUP DATA CLEAR item in the SYSTEM MENU screen. BACKUP DATA CLEAR YES(CLEAR) -> NO (CANCEL) SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON BACKUP DATA CLEAR Screen To clear the backup data: Press the service button to move the -> mark to the YES (CLEAR) item, and press the test button. When the system completes clearing, a 'COMPLETED' message appears on the screen. Press the test button again to return to the GAME TEST MENU screen. Not to clear the backup data: Press the service button to move the -> mark to the NO (CANCEL) item, and press the test button. [. . . ]