User manual SEGA THE HOUSE OF THE DEAD III DELUXE TYPE

[. . . ] www. seuservice. com 1ST PRINTING JAN `03 Deluxe Version Operators's Manual SEGA AMUSEMENTS USA, INC. 999-1696 VISIT OUR WEBSITE! BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. [. . . ] If settings other than those specified are used, inappropriate operations or malfunction may occur. A. SYSTEM TEST MENU MODE System Test Mode can be used to check that the main circuit operations are correct, adjust Monitor color, and perform coin/credit settings. However, this product can only be used with the settings shown below. SOUND TEST - OUTPUT TYPE: STEREO COIN ASSIGNMENTS - COIN CHUTE TYPE: COMMON - SERVICE TYPE: COMMON NETWORK SETTING (MEDIA) - NETWORK TYPE: NONE Press the TEST Button after powering on the unit to display the following SYSTEM MENU. SYSTEM MENU MEDIA BOARD TEST SYSTEM INFORMATION JVS TEST SOUND TEST C. R. T. TEST COIN ASSIGNMENTS CLOCK SETTING NETWORK SETTING(CORE) NETWORK SETTING(MEDIA) ENTER GAME TEST [*******************] EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON Press the SERVICE Button to move the cursor to the desired test item. Move the cursor to the desired item and press the TEST Button to display each test screen. Move the cursor to ENTER GAME TEST and press the TEST Button to enter the individual test menus for each game. Refer to "9-3 GAME TEST MODE". When testing is complete, move the cursor to EXIT and press the TEST Button. The game advertisement screen should be displayed. www. seuservice. com 36 B. MEDIA BOARD TEST Powering off the system during the MEDIA BOARD TEST with a DIMM BOARD will erase the game programme data. Always wait for the test to complete before attempting to exit. MEDIA BOARD TEST is used to check the memory and IC on the MEDIA BOARD connected to the Chihiro. Test screens and test times may differ depending on the type of MEDIA BOARD connected to the unit. The following is the MEDIA BOARD TEST screen for a unit with a DIMM BOARD. MEDIA BOARD TEST VERSION **** STATUS GOOD CHECKING 100% SYSTEM TEST DIMM0 - GOOD DIMM1 - GOOD IC34, 35S - GOOD IC10, 11S - GOOD GD DRIVE - GOOD -- COMPLETED -PRESS TEST BUTTON TO EXIT MEDIA BOARD TEST begins immediately upon entering this test mode. If "GOOD" is displayed to the right of each item, the MEDIA BOARD components are functioning properly. After the test is complete, move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen. 37 www. seuservice. com C. SYSTEM INFORMATION Use SYSTEM INFORMATION to check version and other information for system programmes. Screens may differ depending on the type of MEDIA BOARD connected to the unit. The following is the SYSTEM INFORMATION screen for a unit with a DIMM BOARD. SYSTEM INFORMATION MAIN BOARD REGION **** BOOT VERSION **** QC FIRM VERSION **** SC FIRM VERSION **** SERIAL NO. *************** MEDIA BOARD DIMM BOARD + GDROM MEMORY SIZE 512MB FIRM VERSION **** SERIAL NO. *************** PRESS TEST BUTTON TO EXIT (A) (B) (B) (B) (C) (D) (E) (F) (G) Press the TEST Button to return to the SYSTEM MENU screen. (A) (B) (C) (D) REGION The COUNTRY CODE of the MAIN BOARD. BOOT VERSION, QC FIRM VERSION, SC FIRM VERSION Version information for the MAIN BOARD system programmes. This example shows a DIMM BOARD with a GD-ROM DRIVE connected. [. . . ] 1 3 4 5 6 201 202 203 204 205 PART NO. 999-1606 SPY-0530 HOD-1101 FRQ-1114 SMB-1501 000-T00520-0B 000-F00412 000-T00525-0B 068-552016-0B 000-P00516-W DESCRIPTION STICKER SIDE ASSY MASK PTV HOLDER MASK BRKT UPPER MASK BRKT LOWER M SCR TH BLK M5×20 M SCR FH M4×12 M SCR TH BLK M5×25 FLT WSHR BLK 5. 5-20×1. 6 M SCR PH W/FS M5×16 NOTE www. seuservice. com 92 PTV W/STICKER (Both sides) ITEM NO. 999-1606 200-5788-31 280-5009-01 011-F00310 DESCRIPTION STICKER PTV SIDE PROJECTION DSPL T 50TYPE 31K CORD CLAMP 21 TAP SCR FH 3×10 NOTE 93 www. seuservice. com ASSY PTV BASE DX (D-1/2) www. seuservice. com Direction of the connector: Downward 94 ASSY PTV BASE DX ITEM NO. FRQ-1002X FRQ-1009 SPY-1005 FRQ-1012 SPY-1006 SPY-1007 117-5284 HOD-1003 NOT USED 253-5460-01 253-5396-91 DESCRIPTION PTV CABINET LEG CASTER BRKT A HOLDER PLATE LEG CASTER BRKT B HOLDER BRKT L HOLDER BRKT R PLATE 6-80 BLACK LOCKING BRKT HOD AIR VENT BLACK CABINET HANDLE NOTE (D-2/2) 95 www. seuservice. com AC UNIT 1 104 102 101 ITEM NO. [. . . ]