User manual SEGA WORLD 99

[. . . ] 1ST PRINTING JULY 99 TM WORLD SERIES '99 OWNER'S MANUAL SEGA ENTERPRISES, INC. 999-0813 Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. [. . . ] If the power is turned off before EXITing, the contents of setting changes are ineffective. 6 - 3 GAME TEST MODE TEST MENU INPUT TEST SOUND TEST GAME ASSIGNMENTS VOLUME SETTING BOOKKEEPING BACKUP DATA CLEAR ->EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON Bring the arrow to the item of GAME TEST MODE in the SYSTEM TEST MENU, and press the Test button to display the TEST MENU peculiar to ZOMBIE REVENGE. Press the SERVICE button to move the arrow. Bring the arrow the desired item and press the TEST button. Upon finishing the test, bring the arrow to EXIT and press the TEST button to return to the SYSTEM MENU MODE. 16 6 - 4 INPUT TEST This test displays the state of each switch. If this switch goes ON when activated, it is satisfactory. Display varies depending on the JOYSTICK TYPE setting in (3) GAME ASSIGNMENTS. INPUT TEST 1P_START :OFF 1P_ABUTTON :OFF 1P_BBUTTON :OFF 2P_START :OFF 2P_ABUTTON :OFF 2P_BBUTTON :OFF The XX value of 1P (2P)_STICK (XX, YY), indicates the middle value when the STICK is untouched. It indicates the minimum value when the stick is turned to the right, and the maximum value when the STICK is turned to the left. The volume setting is normal if the maximum value is between 70 and 8F, the minimum value is between 00 and 0F, and the maximum between F0 and FF. The YY value of 1P (2P)_STICK (XX, YY) indicates the 1P_STICK: (80, 80) 1P_BAT : 80 2P_STICK: (80, 80) 2P_BAT : 80 middle vlaue when the STICK is untouched. It indicates the minimum value when the STICK is turned down, and the maximum value when the STICK is turned up. The PRESS TEST BUTTON TO EXIT volume setting is normal when the middle value is between 70 and 8F, the minimum value is between 00 and 0F, and the maximum value is between F0 and FF. The value of 1P (2P)_BAT indicates the minimum value when the BAT is untouched (face up) position. It indicates the maximum value when the BAT is rotated about half a turn until it is stopped. The volume setting is normal if the minimum value is between 00 and 0F and the maximum value is between F0 and FF. If any value is abnormal, return to the menu screen and take steps described in #4 "VOLUME SETTING". Then return to this test and confirm the values. To return to the menu screen, press the TEST Button while holding the SERVICE Button down. 6 - 5 SOUND TEST This allows sound and background used in the game to be checked/ tested. SOUND TEST PACKAGE01 PACKAGE02 BGM_PACK AMBIENCE UMPIRE SYSTEM TEAMCALL SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT To check them, specify the appropriate item using the SERVICE Button and press the TEST Button to generate the sound. By default, the arrow is located at EXIT. 17 6 - 6 GAME ASSIGNMENTS GAME ASSIGNMENTS GAME DIFFICULTY NORMAL INNINGS 1 CREDIT 2 INNINGS FAVORITE OFF EXTRA INNING OFF ->EXIT Allows game difficulty adjustments to be performed/ changed. SELECTION OF DESIRED ITEM 1. ) Press the SERVICE button to move the -> and bring it to the desired item. 2. ) Press the TEST btuuon to change the seting. 3. ) After the device setting is finished, bring the -> to EXIT and press the TEST button. SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT (A) INNINGS (FOUR SETTINGS LISTED BELOW This sets the number of innings that can be played in the VERSUS-COM mode. [. . . ] In this product, setting changes are made during the test mode. as is with the same setting made at the time of shipment. 13 -1 REMOVING THE GAME BOARD To replace the IC Board or to change dip switch settings, take out the IC board using the following procedure; 1 2 3 4 Turn main switch off. Unlock Cabi Drawer, pull outward, exposing all game components. Disconnect all connectors connected to the Shield Case. [. . . ]