User manual SEIKO 4R35

[. . . ] 4R35/36 INSTRUCTIONS BEDIENUNGSANLEITUNG INSTRUCTIONS ISTRUZIONI INSTRUCCIONES INSTRUÇÕES (P. 135) (157) You are now the proud owner of a SEIKO Automatic Watch Cal. To ensure its optimum performance, please read the instructions in this booklet carefully before using it. Please keep this manual handy for ready reference. [. . . ] Push the crown back in to the normal position in accordance with a time signal. 60 55 5 50 10 Dateadjustmentatthebeginningofthemonth It is necessary to adjust the date on the first day after a month that has less than 1 days. period on the first day of a month following a 0-day month. The watch displays "1" instead of "1". Turn the crown to set the date to "1" and then push the crown back in to the normal position. 60 55 5 50 10 English English 45 15 20 45 35 30 25 CAUTION · The mechanism of mechanical watches is different from that of quartz watches. When setting the time, be sure to turn back the minute hand a little behind the desired time and then advance it to the exact time. CAUTION · Do not set the date between :00 p. m. If you do, the date may not change properly / it may cause a malfunction. 11 10 20 40 35 15 30 25 40 English HOW TO SET THE TIME, DAY AND DATE (FOR CAL. 4R36) · · Check that the watch is operating, and then set the time, day and date. The watch is provided with a day and date function and is so designed that the day and date changes once every 24 hours. The date changes around 12 o'clock midnight, and the day around 4:00 a. m. If AM/PM is not properly set, the date will change around 12 o'clock noon, and the day around 4:00 p. m. 55 60 4. Pull out the crown to the second click when the second hand is at the 12 o'clock position. (The second hand stops on the spot. ) Turn the crown to advance the hands until the date changes to the next. Advance the hands to set the correct time. Push the crown back in to the normal position in accordance with a time signal. 55 50 60 English 5 10 5 10 1. (The second hand continues moving and the accuracy of the watch is unimpaired. ) 2. The day can be set by turning the crown clockwise. T he da te c an b e s e t by turning the c row n 35 counterclockwise. Turn it until the previous day's 25 30 date appears. Ex. ) If today is the 5th of the month, first set the date to "4" by turning the crown counterclockwise. 50 45 15 20 40 45 15 20 35 40 30 25 CAUTION · The mechanism of mechanical watches is different from that of quartz watches. [. . . ] Consult the retailer from whom the watch was purchased. Even though you wear the watch every day, it soon stops operating. The date change at 12 o'clock noon. The glass is blurred and the blur persists for a long time. AM/PM is not properly set. Water got inside the watch due to the deterioration of the gasket, etc. 20 * Forthesolutonoftroublesotherthanlistedabove, contacttheretailerfromwhmthewatchwaspurchased. 21 English ACCURACY OF MECHANICAL WATCHES The accuracy of mechanical watches is indicated by the daily rates of one week or so. The accuracy of mechanical watches may not fall within the specified range of time accuracy because of loss/gain changes due to the conditions of use, such as the length of time during which the watch is worn on the wrist, arm movement, whether the mainspring is wound up fully or not, etc. [. . . ]