User manual SEIKO 4S15

[. . . ] For models with date calendar HOW TO USE THE WATCH Set the time/calendar following the instruction pertaining to your watch type. B 1. 3. E Pull out the crown to the first click. Turn the crown until the previous day's date appears in the calendar frame. [. . . ] 6 D Pull out the crown all the way. * If your watch has three hands, pull out the crown when the second hand is pointing to 12 o'clock. Adjust the time by turning the crown in the desired direction. Push the crown back in to the normal position. * If your watch has three hands, push the crown back in to the normal position in accordance with a time signal for "00" seconds. 4. 5. Adjust the time by turning the crown in the desired direction. Push the crown back in to the normal position. * If your watch has three hands, push the crown back in to the normal position in accordance with a time signal for "00" seconds. 7 For models with day and date calendar 3 C 1. 3. F Pull out the crown to the first click. Turn the crown until the previous day's date appears in the calendar frame. Turn the crown in the opposite direction until the desired language (bilingual) for the day before the desired day appears in the calendar frame. * For Cal. 7009 and 7019, push the crown back in to the normal position and then push it repeatedly to set the day. When setting the hour hand, check that AM/PM is correctly set. The watch is so designed that the calendar changes once every 24 hours. 10 Water resistance (5 bar)* If "WATER RESISTANT 5 BAR" is inscribed on the case back, your 5 bar WR watch is designed and manufactured to withstand up to 5 bar and is suitable for wearing while swimming, yachting and taking a shower. Water resistance (10 bar/15 bar/20 bar)* If "WATER RESISTANT 10 BAR", 10/15/20 bar WR "WATER RESISTANT 15 BAR" or "WATER RESISTANT 20 BAR" is inscribed on the case back, your watch is designed and manufactured to withstand up to 10 bar/15 bar/20 bar, respectively, and is suitable for wearing while taking a bath or shallow diving, but not for scuba diving. We recommend that you wear a SEIKO Diver's watch while scuba diving. * Before using a water resistant 5, 10, 15 or 20 bar watch in water, make sure the crown is pushed in completely. Do not operate the crown when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely. * When taking a shower while wearing a water resistant 5 bar watch, or taking a bath while wearing a water resistant 10, 15 or 20 bar watch, make sure to observe the following: · Do not operate the crown when the watch is wet with soapy water or shampoo. · If the watch is left in warm water, a slight time loss or gain may be caused. This condition, however, will be corrected when the watch returns to normal temperature. NOTE: Pressure in bar is a test pressure and should not be considered as corresponding to an actual diving depth since swimming movements tend to increase the pressure at a given depth. [. . . ] NOTE: Pressure in bar is a test pressure and should not be considered as corresponding to an actual diving depth since swimming movements tend to increase the pressure at a given depth. Care should also be taken when wearing and diving into water. TEMPERATURE RANGE [for analogue quartz watches only] Your watch works with stable -10°C accuracy in a temperature range of 5°C and 35°C (41°F and 95°F). Temperatures over 60°C or 140°F (50°C or 122°F for some calibres) may cause battery leakage or shorten the battery life. [. . . ]