User manual SEIKO 5M65 KINETIC

[. . . ] 5M65 INSTRUCTIONS BEDIENUNGSANLEITUNG INSTRUCTIONS ISTRUZIONI INSTRUCCIONES INSTRUÇÕES (P. 93) (P. 123) (P. 153) (183 ) You are now the proud owner of a SEIKO KINETIC ® Cal. For best results, please read the instructions in this booklet carefully before using your SEIKO KINETIC ®. Please keep this manual handy for ready reference. [. . . ] Push the crown back in simultaneously with a time signal. * The setting of the 24-hour, minute and second hands to the current time is now completed. Pull out the crown to the first click. English 2. Turn the crown to set the 2-hour and minute hands to the time in the "different time zone area" you wish to set. * Only the 24-hour and minute hands are to be set at this stage. The hour hand is to be set later so it is not necessary to adjust the hour hand yet, even if it is indicating the wrong time. The date may be altered depending on the position of the hour hand, however it should not cause any concern since it can also be adjusted later. Set the minute hand ahead of the time and then slowly turn it back to the desired time. 5. Turn the crown to set the hour hand to the current hour. (In this example, the current hour in London. ) * * * * Also, adjust the date at this point if necessary. The moment the date changes is midnight. When setting the hour hand, be sure that AM/PM is set correctly. Turn the crown slowly, checking that the hour hand moves in one-hour increments. When adjusting the hour hand, the other hands may move slightly. However, this is not a malfunction. English 1 <Example> * To set the 24-hour hand to the time in New York while setting the hour/minute hands to indicate * the time in London. W hen the time in London is 10:00 A. M. , it is 5:00 A. M. Set the 24-hour hand to indicate "5" on the 24-hour scale (the 2. 5 o'clock position), while the minute hand is pointing at the "0" . Push the crown back in simultaneously with a time minute position. Turn the crown to set the hour hand to indicate the time of the place where you are staying. The hour hand is independently set to the current hour. Clockwise: Setting the time back (The hour hand turns counterclockwise. ) Counterclockwise: Advancing the time (The hour hand turns clockwise. ) * * * 16 The date can be adjusted either by advancing it or by setting it back. Choose whichever requires fewer rotations. To adjust the date without changing the time, turn the hour hand in two full rotation increments. First click position * Turn the crown slowly, checking that the hour hand moves in one-hour increments. 1 English * * * * Refer to "Time difference table" for time differences from GMT (UTC). When adjusting the time difference, make sure that AM/PM and the date are correctly set. [. . . ] l When setting the hour hand, pull out the crown to the first click, turn it to set the hour hand to the current hour, and then check that AM/PM is correctly set. The watch is designed so that the calendar changes once in 24 hours. Turn the hand past the 12 o'clock marker to determine whether the watch is set for the A. M. If the calendar changes, the time is set for the A. M. [. . . ]