User manual SEIKO 6R24 AUTOMATIC

[. . . ] 6R21, 6R24 INSTRUCTIONS BEDIENUNGSANLEITUNG INSTRUCTIONS ISTRUZIONI INSTRUCCIONES INSTRUÇÕES (P. 3) (S. 128) (153 ) English You are now the proud owner of a SEIKO Automatic Watch Cal. To ensure its optimum performance, please read the instructions in this booklet carefully before using it. Please keep this manual handy for ready reference. [. . . ] If you do, the date may not change properly / it may cause a malfunction. · The mechanism of mechanical watches is different from that of quartz watches. When setting the time, be sure to turn back the minute hand a little behind the desired time and then advance it to the exact time. 11 11 9 29 31 1 3 FRI 57 T HU WED AUTOMATIC SAT E SAT 23 21 23 21 Dateadjustmentatthebeginningofthemonth It is necessary to adjust the date on the first day after a month that has less than 1 days. period on the first day of a month following a 0-day month. The watch displays "1" instead of "1". Turn the crown to set the date to "1" and then push the crown back into the normal position. English HOW TO SET THE TIME, DAY AND DATE (FOR CAL. 6R24) · · Check that the watch is operating, and then set the time, day and date. The watch is provided with a day and date function and is designed so that the day and date changes once every 4 hours. The date changes around 1 o'clock midnight, and the day around :00 a. m. If AM/PM is not properly set, the date will change around 1 o'clock noon, and the day around :00 p. m. English AUTOMATIC SU N M ON TU 29 31 1 3 25 27 FRI 57 T HU 19 17 15 13 1. (The second hand continues moving and the accuracy of the watch is unimpaired. ) . The day can be set by turning the crown clockwise. The date can be set by turning the crown counterclockwise. Turn it until the previous day's date appears. Ex. ) If today is the 6th of the month, first set the date to "" by turning the crown counterclockwise. 11 9 WED E SAT 23 21 CAUTION · 1 Do not set the date between :0 p. m. If you do, the date may not change properly / it may cause a malfunction. · CAUTION Do not set the date between :0 p. m. If you do, the date may not change properly / it may cause a malfunction. Pull out the crown to the second click when the second hand is at the 1 o'clock position. (The second hand stops on the spot. ) Turn the crown to advance the hands until the date changes to the next. Advance the hands to set the correct time. [. . . ] The watch was exposed to strong vibrations. The watch has not been overhauled for more than years. Water got inside the watch due to the deterioration of the gasket, etc. Normal accuracy will resume when the watch is kept away from close contact with the magnetic source. If this condition persists, consult the retailer from whom the watch was purchased. [. . . ]