User manual SEIKO DM50

[. . . ] or DOWN button to set the desired tempo. Press UP With each press, the tempo is increased or decreased by one, respectively. The digits move quickly by 10 tempos if the button is kept pressed. RE SE T Power button Press it to turn on and off the metronome and to change over the displays. Tempo LED display It visually represents the tempo of the metronome with the flashing of the LED. [. . . ] or DOWN button to set the volume to the 2. With each press, the volume level changes one by one in the following order. High No sound Low Mid Time setting pressed when the power is turned off Keep the power button or when the metronome display is shown. Follow the procedure below to set the current time. While in the time mode, keep the selector button to show the time setting display. Press the selector button from hours and minutes. Press UP or DOWN button to set the desired time. After the time adjustment is completed, press the power to return to the time display. button * To turn the power off, press the power button again. * If you decide not to use the metronome for a long time, it is recommended that the power is turned off to save battery energy. HOW TO USE The battery included with the metronome is a monitor battery, and its life may be shorter than the specified period. Changeover of displays POWER OFF display Press the power button . Press the power button . Keep the power button pressed. MEMORY BACKUP FUNCTION METRONOME display Keep the power button pressed. Press the power button TIME display Keep the selector button pressed. Even after the metronome is turned off, the settings you have made are stored in memory and will not be erased. is If the battery is replaced with a new one or if the reset switch pushed, the metronome will return to the following initial settings. Tempo Beat/rhythm Volume [120] [0] [High] . TIME SETTING display When the metronome is turned off (when the display is blank), pressing the power button will turn it on. Another press of the button will turn it off again. 30 31 · · · · · 119 120 121 · · · · · 249 250 BATTERY CHANGE When the battery nears its end, the tempo LED display and the liquid crystal display become dim, and the sound becomes weak. In that case, replace the battery with a new one immediately. Otherwise, the metronome may work improperly. Be sure to press the power button to turn off the metronome. Loosen and remove the three screws fixing the rear cover. [. . . ] * When disposing of the old battery, observe the regulations of the authorities concerned. * Keep the old battery and the battery hatch beyond the reach of children. If a child swallows either of them, consult the doctor immediately. SPECIFICATIONS 1. Display Speaker Tempo range Beat/rhythm range Volume Accuracy Power supply Overall dimensions Weight : Liquid crystal display : Piezoelectric speaker : 30 ~ 250 times/min. [. . . ]