User manual SEIKO SEE

[. . . ] Você pode sentir-se orgulhoso de possuir um Relógio SEIKO Quartz Digital Cal. Para obter os melhores resultados, leia atentamente as instruções contidas neste opúsculo antes de usar o seu Relógio SEIKO Quartz Digital. Queira conservar este manual para referências futuras. ENGLISH English CONTENTS Page MODE CHANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TIME/CALENDAR SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] q Four different lengths of time have been preset for the preset timer: 3, 5, 10 and 15 minutes. q The adjustable timer can be set for up to 9 hours and 59 minutes in one minute increments. A Press to show TIMER mode. B Set time C Number of times the countdown is repeated A Hour Minutes Seconds D PRESET TIMER SETTING D Press repeatedly to select the desired preset time. 3 minutes 5 minutes 10 minutes 15 minutes Adjustable timer 10 ADJUSTABLE TIMER SETTING English D Press to select the adjustable timer. 3 minutes 5 minutes 10 minutes 15 minutes w Adjustable timer B w Press and hold for 2 to 3 seconds to show ADJUSTABLE TIMER SETTING display. Press to select the digits (flashing) to be adjusted. Press to return to TIMER mode. Hour Minutes C w w D w B TIMER OPERATION START STOP RESTART C C C C STOP D RESET 11 w w w w English ALARM q The alarm can be set to ring on a 24-hour basis. q At the designated time, the display is illuminated as the alarm rings. ALARM TIME SETTING Current time Alarm mark A w Press to show ALARM mode. Press and hold for 2 to 3 seconds to show ALARM SETTING display. Press to select the digits (flashing) to be adjusted. Hour Minutes B B C w w C A "A" (AM)/ "P" (PM) mark Set alarm time D w D w Press to set the flashing digits. Press to return to ALARM mode. * The alarm and "on" marks are displayed and the alarm is automatically engaged. "on"/"­ ­" (alarm engagement/ disengagement) mark B 12 q ALARM ENGAGEMENT/DISENGAGEMENT English Alarm mark C C With each press in ALARM mode, the alarm is alternately engaged and disengaged. "on" mark * At the designated time the alarm rings for 20 seconds, and the display is illuminated as the alarm rings. To stop them manually, press any of the five buttons. 13 ILLUMINATING LIGHT (Electroluminescent panel) English q Certain materials emit light when voltage passes through them. This phenomenon, known as "electroluminescence", is used to illuminate the display. E Press in any mode. * The display is illuminated for 3 seconds. E 14 NOTES ON USING THE WATCH MODE CHANGE q When the confirmation sound is switched on, a beep sounds with each press of button A. As a reference aid, the pitch is different when the TIME/CALENDAR mode appears. English TIME/CALENDAR SETTING q The calendar automatically adjusts for odd and even months including February of leap years from the year 1995 up to the end of 2044. q After the countdown is repeated 99 times, the number of times the countdown is repeated is displayed in two digits such as "00" for 100, "01" for 101, and so on. q By turning on the button operation confirmation sound, a beep sounds every minute to signal the lapse of time. q By turning on the auto illumination function, the display is illuminated every minute to signal the lapse of time for the last 19 minutes of the countdown. If the countdown is repeated more than 10 times, however, the display will not be illuminated. q Even if the TIMER mode is changed to another while the measurement is in progress, it continues counting properly and the flashing TIMER mode mark indicates that the timer is in use. After the timer is used, however, be sure to reset it to prevent the overconsumption of battery energy that would shorten the battery life. English ALARM q In the alarm time setting, the flashing digits move quickly if button D is kept pressed. q When the time function is displayed in the 24-hour indication, the alarm is also displayed in the 24-hour indication. q When setting the hour digits in the 12-hour indication, check that AM/PM is properly set. q If the watch is left untouched in the ALARM SETTING display with the digits flashing, it will automatically return to the ALARM mode in 2 to 3 minutes. q The alarm can be tested by keeping buttons C and D pressed at the same time in the TIME/CALENDAR mode. ILLUMINATING LIGHT (Electroluminescent panel) q The electroluminescent panel loses its luminance as the battery voltage decreases. Also, its luminance level decreases gradually with use. After 240 hours of use, the level decreases by about half. [. . . ] Less than 20 seconds at normal temperature range (5° C ~ 35° C) (41° F ~ 95° F) Operational temperature range . . . . . . . . . . . . . . . . . ­10° C ~ +50° C (14° F ~ 122° F) Desirable temperature range of use . . . . . . . . . ­10° C ~ +50° C (14° F ~ 122° F) Display system TIME/CALENDAR mode . . . . . . . . . . . . . . . . . . . . . . Year (only in the TIME/CALENDAR SETTING display), month, date, day of the week, hour, minutes and seconds "A" (AM)/"P" (PM) mark in the 12-hour indication TIME/CALENDAR mode mark (Alarm mark, hourly time signal mark and auto illumination mark) 23 STOPWATCH mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]