User manual SEIKO SLD

[. . . ] Você pode agora sentir-se orgulhoso de possuir um Relógio SEIKO Analógico Cal. Para obter os resultados máximos, leia atentamente as instruções contidas neste opúsculo antes de usar o seu Relógio SEIKO Analógico. Guarde este manual para referências futuras. ENGLISH English CONTENTS Page DISPLAY AND CROWN OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HOW TO WIND THE WATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NOTES ON USING THE WATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 7 8 10 11 For the care of your watch, see "TO PRESERVE THE QUALITY OF YOUR WATCH" in the attached Worldwide Guarantee and Instruction Booklet. 3 English CAL. SLD "SPRING DRIVE" Until now, quartz and mechanical watches existed as two distinct entities. Driven by a mainspring, this watch delivers the accuracy of a traditional quartz watch thanks to the use of the Spring Drive Mechanism newly developed by SEIKO. SPRING DRIVE MECHANISM q Like a traditional mechanical watch, the mainspring drives the watch. What is new is that it also runs a generator which in turn oscillates a quartz crystal. This regulates the movement of the hands as accurately as a traditional quartz watch. SWEEP-MOVEMENT SECOND HAND q The second hand moves smoothly without steps. POWER RESERVE INDICATOR q It shows the extent to which the mainspring is wound. UP TO 48 HOURS OF CONTINUOUS OPERATION q When the watch is wound fully, it keeps operating for approximately 48 hours. 4 CAUTION q This watch is driven by a mainspring. If it is necessary to adjust the date during that time period, first pull out the crown to the second click, turn it counterclockwise until the hands advance past 1:00 a. m. , and then, push it back to the first click to set the desired date. q Time setting * When setting the hour hand, check that AM/PM is properly set. The watch is so designed that the date changes once every 24 hours. * The mechanism of this watch is different from that of a conventional quartz watch. To set the time, therefore, first set the hands to a time a few minutes behind the desired time, and then, advance the hands to the exact time. If the hands turn past the desired time, repeat this procedure again. [Tips for setting the time accurately] Your watch is equipped with a newly-developed spring drive mechanism. To set the time accurately, please observe the following. Before setting the time, wind the mainspring fully until the power reserve indicator points to "1". If the watch has stopped completely before it is wound up, wind the mainspring fully, allowing the watch to operate for at least 30 seconds, and then set the time. [. . . ] If the watch has stopped completely before it is wound up, wind the mainspring fully, allowing the watch to operate for at least 30 seconds, and then set the time. Do not leave the second hand stopped for more than 30 minutes by keeping the crown at the second click. If this should happen, push the crown back in to the normal position, allowing the watch to operate for at least 30 seconds, and then set the time. SPECIFICATIONS 1 2 3 Main functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frequency of crystal oscillator . . . . . . . . . . . . . . . . [. . . ]