User manual SEIKO STOPWATCH S056

[. . . ] Do not operate the buttons when the stopwatch is wet or in water. TEMPERATURES If the stopwatch is left in direct sunlight for a long time, the display may become black, but this condition will be corrected when the stopwatch returns to normal temperature. Do not leave your stopwatch in very low temperatures below -10ºC (+14ºF) for a long time since the cold may cause: a. However, the above conditions will be corrected when the stopwatch returns to normal temperature. [. . . ] BATTERY LIFE INDICATOR B A C DISPLAY AND BUTTONS 1 D CHANGE OF DISPLAYS Press Button D to change the display mode. STOPWATCH <LAP TIME> display STOPWATCH <LAP TIME IN PROGRESS> display STOPWATCH <SPLIT TIME> display TIME/CALENDAR display D <S056> D D D STOPWATCH <LAP TIME> display STOPWATCH <LAP TIME IN PROGRESS> display STOPWATCH <SPLIT TIME> display TIMER display TIME/CALENDAR display <S057> D D D D D * If Buttons A, B, C and D are pressed at the same time, all the data in memory will be erased. Refer to "HOW TO RESET THE BUILT-IN IC" on page 5 for further details. TIME/CALENDAR SETTING D Press to show the TIME/CALENDAR display. Press and hold for 2 seconds to show the TIME/CALENDAR SETTING display. * The DAY disappears and the SECOND digits start flashing. Day Confirmation sound for button operation B A B C C Press repeatedly to select the digits (flashing) to be adjusted. SECONDS MINUTES HOUR DATE(DAY) MONTH Year Month Date AUTOMATIC SHUT-OFF (ECO) 12-/24-HOUR INDICATION YEAR Seconds A Press to set the flashing digits or reset the SECONDS to "00. " * The digits move quickly if Button A is kept pressed. "A" (AM)/"P" (PM) mark Hour Minutes 12-/24-hour indication setting: Change between 12- and 24-hour indications is made alternately with each press of Button A. Automatic shut-off function setting (ECO): With each press of Button A, the automatic shut-off function is alternately set to "ON" and "OFF. " D * B After all the adjustments are completed, press to return to the TIME/CALENDAR display. With each press of Button C in TIME/CALENDAR display, the confirmation sound for button operation is alternately switched "ON" and "OFF. " While the confirmation sound for button operation is set to "ON, " the mark appears on display. The DAY is automatically set once the YEAR, MONTH and DATE are set. To quit the time/calendar setting, press Button B. When the stopwatch is left untouched in the TIME/CALENDAR SETTING display, it automatically returns to the TIME/CALENDAR display within two to three minutes. The calendar adjusts automatically for odd and even months including February of leap years from January 1, 2006 to December 31, 2055. When setting the HOUR digits in the 12-hour indication, check that "A" (AM)/"P" (PM) mark is correctly set. In the 24-hour indication, no mark is displayed. If Button A and C are pressed simultaneously, all the digital segments light up. Press any of Button A, B, C or D to return to the TIME/ CALENDAR display. STOPWATCH The stopwatch can measure up to 100 hours in 1/100 second increments. Three separate measurement displays are available; lap time, lap time in progress and split time displays. [LAP TIME display] "LAP" mark [LAP TIME IN PROGRESS display] "RLP" mark [SPLIT TIME display] "SPL" mark B Lap No. B Lap No. B Split No. A C A C A C Lap time Lap time Split time Accumulated elapsed time Lap time in progress Accumulated elapsed time D 2 D D STOPWATCH OPERATION A B C Before using the stopwatch, be sure to reset the digits to "00. " When the stopwatch is stopped, press Button A. When it is counting, press Button C to stop the measurement and then press Button A. D 1 Standard measurement D Press to show the LAP TIME, LAP TIME IN PROGRESS or SPLIT TIME display. C START 2 C STOP A Accumulated elapsed time measurement D Press to show the LAP TIME, LAP TIME IN PROGRESS or SPLIT TIME display. C START * C STOP RESET C C STOP A RESTART Restarting and stopping the stopwatch can be repeated by pressing Button C. Lap time Start 3 Lap time measurement D Press to show the LAP TIME or LAP TIME IN PROGRESS display. RESET C START * A LAP 1 A LAP 2 C A RESET Split time * "Lap time" is the time that has elapsed from the start of one stage of an activity to that of the next stage. "Split time" is the time that has elapsed from the start of an activity to any given stage. FINISH Lap time measurement can be repeated by pressing Button A. In the LAP TIME display, the previous lap time is displayed in the upper row while the accumulated elapsed time is displayed in the lower row during measurement. Lap No. for the previous lap Lap time for the previous lap Accumulated elapsed time In the LAP TIME IN PROGRESS display, the previous lap time is displayed in the upper row while the current lap time measurement is displayed in the lower row during measurement. Lap No. for the previous lap Lap time for the previous lap Lap time in progress 4 Split time measurement D Press to show the SPLIT TIME display. C START * A A C A SPLIT 1 SPLIT 2 FINISH Split time measurement can be repeated by pressing Button A. 5 How to use the memory function Lap/split No. Up to 100 lap/split time data can be stored and recalled either during or after measurement. RESET A C B Press to show the MEMORY RECALL display. * In memory recall after measurement, the oldest measurement stored in memory is displayed first. In memory recall during measurement, the newest one is displayed first. Lap time C or With each press, the stored data is recalled successively from the oldest to the newest. With each press, the stored data is recalled successively from the newest to the oldest. Split time A D Flashing mark appears while the measurement is in progress. B Press to return to the STOPWATCH display. If no lap time/split time measurement is made in the STOPWATCH display and no data is stored in memory, the display shown at right will appear when the display is changed over to the MEMORY RECALL. Even if the stopwatch is reset to "00, " stored data is not erased and can be recalled unless a new measurement is started. The stopwatch can measure the lap time/split times as many times as necessary, but only the first 100 data will be stored in memory. 3 DOUBLE REPEAT TIMER (for Cal. [. . . ] Display system TIME/CALENDAR display . . . . . . . . . . . . . . . Cycles per second) 0. 0012% or 30 seconds per month at normal temperature (25º C 3º C) ­10º C - +60º C 0º C - +50º C Hour, minutes, seconds, year, month, date and day of the week (The calendar automatically adjusts for odd and even months including February of leap years from January 1, 2006 to December 31, 2055. ) 2 rows of digital displays and a dot matrix display (5 x 35 dots) Hour, minutes, seconds and 1/100 seconds (Measures up to 100 hours. ) LAP TIME display/ LAP TIME IN PROGRESS display/SPLIT TIME display Up to 100 sets of lap times and split times can be stored in memory. Timer 1 and Timer 2 displays Hour, minutes, seconds, the number of times the countdown was repeated and the number of times the countdown is to be repeated. Nematic Liquid Crystal, FEM (Field Effect Mode) SEIKO CR2032, 1 piece Approximately 3 years (or approximately 7 years if the automatic shut-off function is activated) C-MOS-LSI, 1 piece TIMER display (Cal. [. . . ]