User manual SENNHEISER EI 1002

[. . . ] Overview of the headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview of the transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview of the transmitter's connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview of the indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] as this can decrease the transmitter's range. It is not necessary that the transmitter and headphones are in the same room, so you can move around freely in the home or outside in the garden. EI 1002 | 9 Putting the EI 1002 into operation Connecting the transmitter to audio sources You can connect up to 3 audio sources (e. g. CD player, DVD player and TV) to the transmitter. The transmitter is fitted with 2 digital and 1 analog inputs and outputs. If you connect several audio sources, you can conveniently toggle between these audio sources with a key press (see page 21). Switch your audio source off before connecting the transmitter. Check the available connection possibilities of your audio source. Select the corresponding connection cable and, if necessary, a suitable adapter. Connection possibilities (output) of the audio source Connection cable/adapter Stereo audio cable with dual RCA plugs on each end Stereo audio cable with audio adapter (to be ordered separately) Stereo audio cable with audio adapter Coaxial cable with with a single RCA plug on each end Optical digital cable (to be ordered separately) A RCA (analog) B SCART (analog) C Headphone socket (analog) L R D Coaxial (digital) E Optical (digital) Follow the instructions in the corresponding chapter in order to connect your transmitter to the audio source. A Connecting the transmitter to RCA sockets · OUT R L IN 9V/1A R R L L OUT COAXIAL IN OUT OPTICAL Pairing DC IN ANALOG DIGITAL -LEVEL K Connect the RCA plugs of the stereo audio cable K to the corresponding RCA sockets of your audio source. Connect the RCA plugs of the stereo audio cable K to the left ("L") and right ("R") ANALOG IN input ·. 10 | EI 1002 Putting the EI 1002 into operation B Connecting the transmitter to a SCART socket · IN 9V/1A R R L L OUT COAXIAL IN OUT OPTICAL Pairing DC IN ANALOG DIGITAL -LEVEL K Connect the RCA plugs of the stereo audio cable K to the corresponding RCA sockets of the SCART adapter. Connect the SCART adapter to the SCART socket of your audio source. Connect the RCA plugs of the stereo audio cable K to the left ("L") and right ("R") ANALOG IN input ·. To switch the loop through mode on: Touch the touch key for selecting the audio source E on the transmitter until the ANALOG LED B, the COAXIAL LED C and the OPTICAL LED D light up simultaneously for a moment. The ON LED G lights up red, the transmitter is in loop through mode. To switch the loop through mode on: Touch the touch key for selecting the audio source E on the transmitter again until the ANALOG LED B, the COAXIAL LED C and the OPTICAL LED D light up simultaneously. The ON LED G is off, the transmitter is in standby mode. B C D E EI 1002 | 17 Using the EI 1002 Switching the transmitter off Briefly touch the Power touch key F. The transmitter is ­ in standby mode when the ON LED G is off or ­ in loop through mode when the ON LED G lights up red. When the transmitter is switched on the next time, it selects the last set input. ON F To disconnect the transmitter from the mains: Pull out the mains plug from the wall socket. The transmitter is reset to the factory default settings. Please note that In this case, the headphones' rechargeable batteries will not be recharged. 18 | EI 1002 Using the EI 1002 Switching the headphones on/off WARNING Danger of hearing damage!Listening at high volume levels for long periods can lead to permanent hearing defects. Before putting the headphones on, set the volume to a low level. Do not continuously expose yourself to high volumes. WARNING Interferences due to magnetic fields! [. . . ] KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www. sennheiser. com or contact your Sennheiser partner. In compliance with the following requirements · RoHS Directive (2002/95/EC) · · · · · WEEE Directive (2002/96/EC) Battery Directive (2006/66/EC) R&TTE Directive (1999/5/EC) EMC Directive (2004/108/EC) Low Voltage Directive (2006/95/EC) CE Declaration of Conformity The declaration is available at www. sennheiser. com. Before putting the product into operation, please observe the respective country-specific regulations! [. . . ]