User manual SENNHEISER EM 1031-U

[. . . ] 4 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Overview of the EM 1031-U/EM 2050 receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Overview of the displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] "Sync" appears on the display panel of the receiver. Place the infra-red interface of the transmitter (see the instruction manual of the transmitter) in front of the infra-red interface ´ of the receiver. The parameters are transferred to the transmitter. When the transfer is completed, " " appears on the receiver's display panel. The receiver then switches back to the current standard display. To cancel the transfer: Press the STANDBY button º on the receiver. " " appears on the display panel of the receiver. " " also appears if no suitable transmitter was found. ¿ ´ ¿´ Deactivating the lock mode temporarily You can activate or deactivate the automatic lock mode via the "Auto Lock" menu item (see page 25). If the lock mode is activated, you have to temporarily deactivate it in order to be able to operate the receiver: Press the jog dial or the STANDBY button. "Locked" appears on the standard display. "Unlock?" appears on the display panel. To subsequently return to the last edited menu item: Press the jog dial repeatedly until the last edited menu item appears. Menu Squelch Easy Setup Setup Frequency Preset Name AF Out Equalizer Auto Lock Advanced Exit Exiting a menu item Change to the "Exit" menu item. You return to the next higher menu level. To directly return to the current standard display: Press the STANDBY button. 20 Adjustment tips and functions Adjustment tips and functions The operating menu allows you to make settings for your receiver and your transmitters. The "Guitar Tuner" and "Soundcheck" standard displays provide additional functions and can be called up by turning the jog dial, without having to get into the operating menu. Standard displays with additional functions Tuning a guitar (for SK transmitters only) Activate the "Guitar Tuner" standard display via the operating menu (see page 27). Connect a guitar to your SK transmitter. On the receiver, change to the "Guitar Tuner" standard display (see page 16). PEAK 40 30 30 25 20 20 10 RF 0 -10 -20 -30 -40 AF B. CH: 20. 64 **2000** PEAK 40 30 30 20 25 20 10 RF 543. 200 MHz SKM2000 EQ: P + 12dB MUTE 0 -10 -20 -30 -40 -40 AF 543. 200 MHz **2000** MUTE 440 Hz "Receiver Parameters" standard display "Guitar Tuner" standard display Tune your guitar. The receiver automatically recognizes the pitch of the plucked string. Doing a soundcheck By doing a soundcheck, you can check the reception area for field strength gaps ("dropouts") which cannot be compensated for by the receiver's diversity circuitry. The "Soundcheck" standard display must not be activated until later because otherwise the recording will give wrong results. If necessary, change from the "Soundcheck" standard display to one of the other standard displays of your receiver. Position the transmitter in the area in which it is to be used and switch it on. Leave the transmitter switched on and go to your receiver. [. . . ] Adjust the transmitter sensitivity correctly (see the instruction manual of the transmitter). Receiver's audio output level is adjusted too Reduce the audio output level high (see page 25). No access to a certain channel During scanning, an RF signal has been detected on this channel and the channel has been locked During scanning, a transmitter of your system operating on this channel has not been switched off Set the transmitter operating on this channel to a different channel and redo the frequency preset scan (see page 18). Switch the transmitter off and redo the frequency preset scan (see page 18). 35 If a problem occurs . . . Problem Possible cause Possible solution None of the diversity Receiver's squelch threshold is adjusted too Reduce the squelch threshold (see page 17). displays I or II appears on high the display panel Transmitter's RF signal is too weak Increase the transmission power of the transmitter. [. . . ]