User manual SENNHEISER EM 3732-II COMMAND

[. . . ] EM 3731-II EM 3732-II EM 3732-II Command Instruction manual Contents Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The product family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 The frequency bank system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The position of a menu within the operating menu is illustrated by a graphic in the upper display margin (the "Tune" menu is on the very left of the operating menu). 000 MHz Tune B. Ch 1. 01 Bank Turn the jog dial 7 until the icon of the desired menu is in the center of the display. Press the jog dial 7 to get into the setting mode of the selected menu. The icon of the menu is displayed and the current setting starts flashing. In addition, the green backlighting of the save button 8 flashes. Adjusting a setting B. Ch U. 01 776 UHF 776. 000 960 MHz MHz B. Ch U. 01 776 UHF 777. 225 Turn the jog dial 7 until the desired setting appears. Press the jog dial 7 to confirm the selected setting. Depending on the selected menu, the next setting that can be changed and confirmed by turning and pressing the jog dial 7 flashes. Storing a setting Press the save button 8 to store the setting. An animation appears on the display, indicating that the setting has been stored. The display then changes to the selection mode of the operating menu. Exiting the operating menu/cancelling an entry You can exit the operating menu or cancel an entry at any time. 960 MHz MHz 6. 000 . 01BANK CH M H z HD P save AF COM clock esc sync Press the esc button 6. The display then returns to the previous menu level. To return to status display, you may have to press the esc button 6 several times in succession. 6 24 Using the operating menu Overview of the menus Selection mode A Setting mode AF COM RF 300 100 30 B PEAK 100 50 10 % DEV µV 10 776. 000 01. 01 BANK CH M H z HD P esc B. Ch 776. 000 MHz Tune B. Ch 1. 01 Bank U. 01 776 UHF 776. 000 MHz B. Ch U. 01 776 UHF 866 MHz 777. 000 MHz 866 MHz Receiving frequency Adjusting the receiving frequency (first three digits) save Adjusting the receiving frequency (last three digits) 77. 05 MHz une B. Ch B. Ch B. Ch 1. 01 Bank. Ch CEL Nam 777. 005MHz 1. 848. 225MHz 5. 16 Frequency bank and channel Current frequency bank and channel save +, -|/0123456 789*;<=> AB CDEFGHIJKLMN OPQRSTUVWXYZ Adjusting the frequency bank (1. . . 6, U) and the channel (1. . . 60) . Ch . 16 B. Ch CEL Name 30 Squel CE +, -|/0123456 789*;<=> AB CDEFGHIJKLMN OPQRSTUVWXYZ Name Current name Entering the name save 300 EL ame 30 50 50 30 µV µV 30 10 3 300 30 10 µV µV 30 10 3 10 Squelch Booste Squel Squelch Current squelch threshold Adjusting the squelch threshold save 30 uelch Booster +12 AF O Booster Feed On Booster Feed Off Booster supply voltage Current setting of the booster supply voltage Switching the booster supply voltage on/off save ooster +12 AF Out 48 Clock 25 Using the operating menu Selection mode 30 quelch quelch Booster Setting mode +12 AF O +12 dB ooster +12 AF Out 48 Clock +12 +18 dB +18 Audio output level Current audio output level Adjusting the audio output level (-10 dB to +18 dB) save 3 18 F Out 48 20 Clock Comm 44. 1 48 kHz 88. 2 96 Ext. 44. 1 48 kHz 88. 2 96 Ext. 48 96 Sampling rate of the digital audio signal Current sampling rate Adjusting the sampling rate (44. 1, 48, 88. 2, 96, Ext) save 3 AF COM COM AF AF COM 3 96 lock 3 1 Command Comm More Audio outputs of the receiver Current setting of the audio outputs Adjusting the main output "AF"/command output "COM" save 3 mmand More HiD plu Changing to the extended menu esc Scan Comp 26 Using the operating menu Selection mode Setting mode mmand More esc HiD plu Scan Comp Channel list Scan new Scan reset Bank Free Bank Free 123 43 40 42 456U 32 31 33 60 Scanning the frequency banks for free channels Displaying the list of free channels Displaying the last scan result Channel list Scan new Scan reset Bank Free Bank Free 123 43 40 42 456U 32 31 33 60 Starting the scan Displaying the new scan result Channel list Scan new Scan reset Bank Free Bank Free 123 43 40 42 456U 32 31 33 60 Releasing channels marked with "Freq. occupied" Number of "free" channels is reset to the maximum B. Ch 776. 225MHz 3. 01 save* Bank Free Bank Free 123 43 40 42 456U 32 31 33 60 Selecting a channel Selecting a frequency bank HiDyn plus 4 HiDynplus HDX HiDyn plus HiDynplus HDX HiDyn plus can Compander Disp Compander system Current compander system Selecting the compander system save Dyn us 4 10 49 68 75 pander Display IP-Ad * After pressing the save button 8, the display automatically changes to the "Bank. Ch" menu (see page 25) ­ i. e. [. . . ] 200 mA each, short-circuit proof, switchable IEEE 802. 3-2002, shielded RJ 45 socket with optional locking facility AES3-2003, XLR-3, 44. 1, 48, 88. 2 or 96 kHz SR, 24 bits, externally synchronizable 2 BNC sockets (75 ), daisy chain output 44. 1 kHz, 48 kHz, 88. 2 kHz, 96 kHz 75 , transformer balanced, AC-coupled input voltage range 200 mV . . . input voltage 15 V (DC + AC) 75 , transformer balanced, AC-coupled output voltage 2. 5 V± 250 mV at 75 source impedance Mains connector Dimensions W x D x H [mm] Weight Booster supply Ethernet Digital output Word clock connection Accepted sampling rates Word clock input Word clock output Operating conditions Ambient temperature Relative humidity Power supply Protection against dripping and splashing Storage and transport conditions Ambient temperature Relative humidity Protection against dripping and splashing Shock test ­25°C to +70°C max. 90% at 40°C the product must not be exposed to dripping and splashing (IP 20) shock test according to IEC 68 or EN 60068, T2-27 ­10°C to +55°C max. 85% at 40°C (non condensing) 100 to 240 V~, 50/60 Hz the product must not be exposed to dripping and splashing (IP 20) In compliance with Europe EMC Radio Safety 47 CFR 15 Industry Canada USA Approved by EN 301489-1/-9 EN 300422-1/-2 EN 60065 subpart B RSS-123, IC: 2099A-EM373X2 46 Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. [. . . ]