User manual SENNHEISER EW G3 566-608 MHZ ADDITIONAL INFORMATION

[. . . ] Do not use any cleansing agents or solvents. Thank you for choosing Sennheiser! We have designed this product to give you reliable operation over many years. Over half a century of accumulated expertise in the design and manufacture of high-quality electro-acoustic equipment have made Sennheiser a world-leading company in this field. Please take a few moments to read these instructions carefully, as we want you to enjoy your new Sennheiser products quickly and to the fullest. 2 Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the screw is missing, malfunctions may occur during tough use. Put on the sound inlet basket and identification ring supplied with the new microphone head (NB: do NOT use the old basket, as the different heads use slightly differing internal foam) and screw it tight. Close the radiomicrophone and put it into operation. Note: Microphone capsule, sound inlet basket and foam insert form an acoustic unit and must therefore always be exchanged all together. Each microphone head comes with a color-coded identification ring to distinguish different microphone heads from each other (green = MD 835, blue = MD 845, red = ME 865). 21 Using the components Switching the components on/off The ew 100 G2 transmitters and receivers can only be switched off when the standard display is shown on the display panel. Within the operating menu, the ON/OFF button or the POWER button (EM 100 G2 only) serves as the ESC (cancel) key, i. e you cancel your entry and return to the standard display. Note: Remove the batteries or the accupack when the units will not be used for extended periods of time. Switching the rack-mount receiver on/off Press the POWER button ´ to switch the receiver on. To switch the receiver off, press the POWER button until "OFF" appears on the display. ´ Switching the bodypack receiver/transmitter on/off Press the two unlocking buttons cover . and open the battery compartment µ » Press the ON/OFF button µ to switch the bodypack receiver/transmitter on. To switch the bodypack receiver/transmitter off, press the ON/OFF button µ until "OFF" appears on the display. After switching the unit on, the standard display is shown on the display panel. EM 100 G2 EK 100 G2 Getting into the operating menu Press the SET button to get from the standard display into the operating menu. The last menu selected flashes on the display. Transmitters Selecting a menu Press the / buttons to select a menu. Press the SET button to get into the setting mode of the selected menu. The current setting that can be adjusted flashes on the display. Adjusting a setting Press the / buttons to adjust the setting. By briefly pressing the / buttons, the display jumps either forwards or backwards to the next setting. In the "CHAN", "TUNE" and "NAME" menu, the / buttons feature a "fast search" function. If you hold down a button, the display cycles continuously. The "fast search" function allows you to get fast and easily to your desired setting. The new setting flashes on the display until it is stored. Storing a setting Press the SET button to store the setting. "STORED" appears on the display, indicating that the setting has been stored. The display then returns to the previous menu level. [. . . ] power consumption at nominal voltage Power consumption with switched-off transmitter Operating time (with batteries) Operating time (with BA 2015 accupack) Dimensions [mm] Weight (incl. batteries) Microphones Transducer principle Sensitivity Pick-up pattern Max. SPL Microphone heads Transducer principle Sensitivity Pick-up pattern Max. SPL Color of identification ring MD 835 dynamic 1. 5 mV/Pa cardioid 150 dB SPL green MD 845 dynamic 1 mV/Pa super-cardioid 154 dB SPL blue ME 865 condenser 3 mV/Pa super-cardioid 144 dB SPL red ME 2 condenser 20 mV/Pa omni-driectional 130 dB SPL ME 3 condenser 1. 6 mV/Pa super-cardioid 150 dB SPL ME 4 condenser 40 mV/Pa cardioid 120 dB SPL SK 100 G2 typ. [. . . ]