User manual SENNHEISER IS 410

[. . . ] Instructions for use IS 410 A B C A B C Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The IS 410 stethoset receiver system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Operating controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If necessary, check the menu setting of your TV. Note: With most TVs, the headphone socket is located at the front or sides. Depending on the socket, you may have to use the adapter . In order to prevent damage to hearing, newer TVs often have a function that mutes the TV sound as soon as headphones are connected. If another person wants to listen to the TV sound via the loudspeaker, deactivate the muting function via the TV menu setting. B a t out io cke ud so RC A Connecting the transmitter via the RCA sockets Connect the connecting cable ¹ to the adapter . R L ¹ Connect the red and white RCA connectors of the adapter to the matching red and white RCA sockets on your sound source. Note: With most TVs, the RCA sockets are located at the rear. 6 C Connecting the transmitter via the SCART socket If your sound source has a SCART socket, you can order the suitable SCART adapter (see "Accessories" on page 15) from your Sennheiser dealer. ¹ Connect the connecting cable ¹ to the SCART adapter . Plug in the SCART adapter to the SCART socket on your TV. If your TV has several SCART sockets, select a SCART socket that is also an output (for details, see operating manual of your TV). D Using an external microphone If your sound source doesn't have a headphone or audio output, SCART or RCA socket, you can use your system together with an external microphone (see "Accessories" on page 15). Connect the microphone to the blue socket AUDIO transmitter. on the Position the microphone in front of the loudspeaker of your sound source. You can change the sound by varying the position of the microphone in front of the loudspeaker. Connecting the transmitter to the mains Connect the mains unit to the yellow socket (12 VDC) the transmitter. on Plug the mains connector into a wall socket. If the receiver is stored in the transmitter's charging compartment , the LED ¸ goes off. Note: Pull the mains connector out of the wall socket when the transmitter will not be used for extended periods of time (e. g. In this case, however, the rechargeable battery will not be recharged. 7 Inserting and removing the receiver's rechargeable battery Insert the battery into the compartment as shown on the left. Make sure that the battery is inserted correctly. To remove the battery, use the finger catch projection to pull the battery out of the receiver. Note: The receiver is delivered with the battery inserted. Before you use the rechargeable battery for the first time, charge it until the LED µ lights up green (see "Storing and charging the receiver" on page 11). This can take a maximum of 3 hours. Inserting a spare rechargeable battery into the transmitter's charging compartment You can charge a spare battery (not included) in the charging compartment at the side of the transmitter. This spare battery is not required for operating the IS 410 but offers extended listening time while the discharged first battery is being recharged. Insert the spare battery into the charging compartment as shown on the left. If the battery is inserted correctly, the LED lights up red: The rechargeable battery is being charged. [. . . ] 3. 5 mm 3-pole jack/standard stereo L R GND 3. 5 mm 4-pole jack/microphone with additional power supply L R 8V GND 1k 15 Specifications System Modulation Carrier frequencies Range AF frequency response THD FM stereo 2. 3 / 2. 8 MHz approx 12 m within a room 50 Hz­16 kHz <1% Transmitter Audio /microphone connection Charging time of rechargeable battery Power supply Weight Dimensions 3. 5 mm stereo jack socket approx. 3 hrs 12 VDC/50 mA via NT 410 mains unit approx. SPL Power supply Operating time Weight Dimensions 125 dB (SPL) via BA 300 Li-Ion rechargeable battery (3. 7 V / 150 mAh) approx. 230 x 135 x 20 mm 16 Manufacturer Declarations Warranty regulations The guarantee period for this Sennheiser product is 24 months from the date of purchase. [. . . ]