User manual SENNHEISER RS 20

[. . . ] 2 Mark frequency on an adhesive type and stick it to the receiver housing so that it can be seen through the window at the front panel of the RS 20. [. . . ] This is to avoid short circuit of battery supply voltage. Note: The RS 20 incorporates two independent power supplies: One for receivers 1 to 3 and a second for receivers 4 to 6. To ensure an equal discharge of both power supply sections when e. The output level of each receiver or the sum may be monitored visually by the LED - indicator or by listening to it with a headphone. The channel to be monitored may be selected with the channel selector switch. Data BNC - socket, unbalanced, 50 n 3 - pin XLR - connector, balanced, floating AF - level 2 to 20 mV at nominal swing, adjustable nominal load 200 n 6, 3 mm jack, output level: 0 to 2, 5 V adjustable; load", 47 n 2 x 3 dry batteries LR 20, type alcaline manganese approx. [. . . ] Data BNC - socket, unbalanced, 50 n 3 - pin XLR - connector, balanced, floating AF - level 2 to 20 mV at nominal swing, adjustable nominal load 200 n 6, 3 mm jack, output level: 0 to 2, 5 V adjustable; load", 47 n 2 x 3 dry batteries LR 20, type alcaline manganese approx. [. . . ]