User manual SENNHEISER SDC 8200 CU

[. . . ] System Manual SDC 8200 Conference System Thank you for choosing Sennheiser! We have designed this product to give you reliable operation over many years. Over half a century of accumulated expertise in the design and manufacture of high-quality electro-acoustic equipment have made Sennheiser a world-leading company in this field. Please take a few moments to read these instructions carefully, as we want you to enjoy your new Sennheiser products quickly and to the fullest. 2 Contents Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Important safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Therefore, no "master" icon or "slave" icon appears on the display. Exiting the "slave" mode of a central unit If several SDC 8200 CU central units are interconnected, the operating controls of all "slave" central units are locked, except for the F2 function key. With the F2 function key, you can unlock the operating controls of a "slave", which then automatically becomes a "master". configure the AUX outputs or to divide a large conference and interpretation system up into several smaller systems. Please be aware that the AUX inputs of the slave central units will be disabled in a Master-Slaveconfiguration, only the AUX inputs of the master central unit will be available. To unlock the operating controls of a "slave" central unit: Press the F2 function key » and keep it pressed for three seconds. The "master" icon appears in the upper right corner of the display. >Volume = P1 P2 P3 P4 P5 P6 Note!Please note that the new "master" central unit is no longer connected to the conference system. To reintegrate the "slave" central unit into the conference system and to lock the operating controls: >Volume = Press the F2 function key » and keep it pressed for three seconds. The "slave" icon appears in the upper right corner of the display. P4 P5 P6 P1 P2 P3 55 Setting up the SDC 8200 system Connecting additional equipment Via the two audio inputs AUX IN 1 and AUX IN 2 of the central unit, you can connect microphones with suitable preamplifiers or you can feed audio signals from additional audio equipment to the conference system. The external audio signals are fed to the floor channel which is output via the consoles' built-in loudspeakers. The output signal of the floor channel is available at the audio output AUX OUT 1. Via the five audio outputs AUX OUT 2 to AUX OUT 6, you can output any desired channel (floor channel or interpretation channels). Via the audio outputs, you can: connect a PA system via which the floor channel or an interpretation channel can be transmitted to e. g. the foyer or another room, transmit the audio signal of the floor channel or an interpretation channel as "original soundtrack" to a broadcasting station, connect an infrared language distribution system to the central unit, allowing guests or participants who don't have their own conference console to follow the conference via infrared headphones. With the SDC 8200 CU central unit, guests or participants can choose between the floor channel and up to 28 interpretation channels. With the SDC 8200 CU-M central unit, guests or participants can choose between the floor channel and up to four interpretation channels. Optionally, you can connect an SDC 8200 AO analog output unit to the central unit. The analog output unit features nine XLR-3M audio outputs via which you can output the floor channel and up to eight additional interpretation channels and to which you can connect external equipment such as a recording unit, etc. Connecting external audio sources You can connect external audio sources such as wired microphones, wireless microphone systems, the audio output of a video recorder, a CD player, etc. The audio sources to be connected must deliver a balanced mono signal at the XLR-3F sockets. The external audio signals are fed to the floor channel which is output via the consoles' built-in loudspeakers. [. . . ] For this reason, we recommend that the sales receipt be retained as proof of purchase. Without this proof (which is checked by the responsible Sennheiser service partner) you will not be reimbursed for any repairs that are carried out. Depending on our choice, guarantee service comprises, free of charge, the removal of material and manufacturing defects through repair or replacement of either individual parts or the entire device. operating faults, mechanical damages, incorrect operating voltage), wear and tear, force majeure and defects which were known at the time of purchase are excluded from guarantee claims. [. . . ]