User manual SENNHEISER SKM 5200-II

[. . . ] SKM 5200-II Instruction manual Contents Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The SKM 5200-II radio microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Change the transmission frequency (see "Adjustment tips for the operating menu" on page 23. ). The automatic lock mode (autolock function) The radio microphone has a lock mode that prevents that the radio microphone is accidentally programmed while operating. When the autolock function is activated via the "LOCK" menu (see page 27) the lock mode is automatically activated 10 seconds after pressing the last button and remains activated. AF CH dB MHz Prior to this, the lock mode icon several times on the display. flashes You can deactivate the autolock function either permanently (see page 27) or temporarily (see page 15). 14 Using the radio microphone Deactivating the autolock function temporarily To be able to make changes to the settings via the operating menu, you must temporarily deactivate the lock mode. ¶ º To achieve this, either press the ON/OFF button º or the multi-function switch ¶ (switch position SET). "LOCK" appears on the display panel ². Slide the multi-function switch ¶ to the position (UP) or ). "UNLOCK" appears on the display panel ². Press the multi-function switch ¶ (switch position SET). You can now change the settings. UP SET ¶ DOWN After you have exited the operating menu, the lock mode is automatically re-activated after 10 seconds. You can also immediately activate the lock mode by pressing the ON/OFF button º briefly. Identifying the radio microphone The radio microphone comes with nine interchangeable color-coded identification markers, allowing you to clearly identify each radio microphone. To remove the identification marker, press the two snap-in pins together while sliding the identification marker out of the guide rails. Put on the new identification marker by sliding it onto the guide rails. 15 The operating menu The operating menu The buttons Button ON/OFF, ESC Mode Switched off Function · · Display mode · Briefly pressing the button: Switching the radio microphone on Keeping the button pressed: Doing a frequency check Briefly pressing the button (with activated autolock function): Immediately activating the lock mode Briefly pressing the button (with activated lock mode): Calling up the lock mode for deactivation Pressing the button for 3 sec. (with deactivated lock mode):Switching the radio microphone off · · Selection mode Setting mode Cancelling the entry and returning to the display mode Cancelling the entry and returning with the last setting stored to the last parameter displayed in the display mode · · With deactivated lock mode: Changing to the selection mode With activated lock mode: Calling up the lock mode for deactivation SET Display mode Selection mode Setting mode (UP)/ (DOWN) Display mode Changing to the setting mode of the selected menu Storing the setting and returning to the selection mode ("STORED" is displayed) Changing to the previous parameter ( ) or changing to the next parameter ( ) 16 The operating menu Button (UP)/ (DOWN) Mode Selection mode Setting mode Function Changing to the previous menu ( ) or changing to the next menu ( ) Increasing ( ) or reducing ( ) the setting of the selected menu Overview of the operating menu : Menu "CHAN" "TUNE" "NAME" "ATTEN" "LOWCUT" "VIEW" "RESET" "LOCK" "POWER" "SW--REV" "EXIT" Function of the menu Selects a channel Sets transmission frequencies for the frequency bank "VAR" (variable bank) Enters a name Adjusts the microphone sensitivity Adjusts the bass roll-off frequency Selects the standard display Loads the factory-preset default settings Activates/deactivates the autolock function Adjusts the output power Displays the current software revision Exits the operating menu and returns to the standard display Working with the operating menu The operating menu has three modes: · Display mode In display mode, you can display the current menu settings one after the other ­ even when the lock mode is activated. · Selection mode In selection mode, you can select the menu whose setting you want to change. To change to the selection mode, the lock mode must be deactivated. · Setting mode In setting mode, you can change the setting of the selected menu. 17 The operating menu By way of example of the "LOWCUT" menu, this section describes how to use the operating Display mode SET/ON MHz Selection mode Setting mode MHz SET SET MHz TUNE SET MHz LOWCUT Adjusting the low-cut-frequency SET 120 Hz Current low-cut-frequency Current low-cut-frequency STORED SET 190 Hz FLAT, 120 Hz, 190 Hz After switch-on After switch-on, the standard display is shown on the display panel. Depending on the setting, the transmission frequency, the channel number or the name of the radio microphone is displayed. Displaying the menu settings in display mode In display mode, and with the lock mode activated, you can display the current menu settings one after the other (see "Overview of the operating menu" on page 21). After a few seconds, the display returns to the standard display. With the lock mode activated, the LC display is not backlit. 18 The operating menu UP SET ¶ DOWN Slide the multi-function switch ¶ to the position (UP) or (DOWN) to display the menu settings. If you slide the multi-function switch repeatedly to the same position, all menu settings are displayed one after the other. Changing to the selection mode To change from display mode to selection mode, you have to deactivate the lock mode. Deactivate the lock mode (see "Deactivating the autolock function temporarily" on page 15). You can now select the menu whose settings you want to adjust. Press the multi-function switch ¶ (switch position SET) to change to the menu that was displayed in display mode. Selecting a menu UP SET Slide the multi-function switch ¶ to the position (UP) or (DOWN). ¶ DOWN Press the multi-function switch ¶ (switch position SET). [. . . ] deviation) AF frequency response Noise reductions system Low-cut frequency (­3 dB) Sensitivity Power consumption (without LC display illumination) Operating time 31 Specifications with BA 5000-2: PWR. LO: approx. 7 hrs 20 min Dimensions Weight length: 200 mm (without microphone head), 35. 5 mm approx. BA 5000-2, without microphone head Operating conditions Ambient temperature Relative humidity Power supply ­10 °C to +55 °C max. 90 % (non condensing) B 5000-2 battery box (1. 5 V AA size batteries) or rechargeable Sennheiser BA 5000-2 battery pack Storage and transport conditions Ambient temperature Relative humidity Shock test ­25 °C to +70 °C max. [. . . ]