User manual SENNHEISER SKP 30

[. . . ] INSTRUCTION MANUAL SKP 30 33 Contents 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Short description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Areas of application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 HiDyn plus noise reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] LED flashing: The battery is going flat!You should immediately replace the battery!43 11 Operation The SKP 30 plug-on transmitter has been factory-preset to allow immediate use after switch-on. Please note, however, that the transmitter sensitivity is dependent on the application. To avoid overmodulation and distortion, please first check whether the preset sensitivity is suitable for your particular application (u "16 Adjusting the sensitivity (SEnSit)", page 49). Attention: To operate switches or press buttons on your transmitter, do not use any tools such as screw drivers, etc. , as this can damage the operating controls. ON/OFF MUTE SET Press the ON/OFF button to switch the transmitter on or off. Use the MUTE switch to noiselessly mute the audio signal without switching off the transmitter. Press the SET button -- to select a menu, -- to change to the next menu, -- to return to the top menu level. Press the UP button -- to adjust the setting of a menu. Press the DOWN button -- to adjust the setting of a menu. 44 12 LC display panel ³ · Alphanumeric main display 3-step level display for battery status 13 Basic functions of the Sennheiser operating menu The SKP 30 offers straightforward, menu-assisted operation via the SET, and buttons. Important: With the / buttons you can directly switch between the factory-preset fixed frequency memories (presets). Your selection becomes effective immediately. When pressing the SET button, the last flashing display becomes the standard display. Press the SET button to enter the top menu level: By briefly pressing SET again, you can change to the next menu. one second, the selected menu appears on the display and then the current setting of the menu is indicated. Press the / buttons to adjust the settings of the selected menu: The new setting starts flashing on the display. If you return to the previous setting, the flashing stops. Important: New settings become effective immediately and will be retained in memory on switch-off!N. B. : When changing transmission frequencies, care should be taken to avoid causing interference to other channels/ users. In the "tunE" and "Ch no" menu, the / buttons feature a "fast search" function. By briefly pressing the / buttons, the display jumps either forwards or backwards to the next setting. [. . . ] Note: Channel numbers which have already been assigned to a fixed frequency memory are skipped!Press the SET button to return to the top menu level. The display then switches back to the standard display. 55 21 Activating/deactivating the lock-mode function (LOC) To prevent accidental programming or switching off during operation, we recommend locking the / buttons and the ON/OFF button via the lock-mode function. Activating the lock-mode function Select the "LOC" menu by pressing the SET button. The current setting is indicated on the display. Press the button to activate the lock-mode function. [. . . ]