User manual SENNHEISER SR 2020 D

[. . . ] Tourguide Wireless Transmitter SR 2020 D Instruction manual Contents Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 System components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Tourguide system overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use the headphone volume control (VOL) · to set the volume for the connected headphones to the minimum before putting the headphones on. To monitor the audio signal via headphones: ³ · Set the headphone volume control · to the lowest volume by turning it to the left as far as possible. Connect headphones with a ¼" (6. 3 mm) stereo jack plug to the headphone output ³. Gradually turn up the volume. 13 Operating the SR 2020 D Operating the SR 2020 D Switching the transmitter on/off To switch the transmitter on: ² Press the ON button ². The display panel indicates the device name and then switches to the standard display. To switch the transmitter off: Press the ON button ² until "OFF" appears on the display. The display panel goes off and the transmitter switches off. Note: The transmitter can only be switched off when the standard display is shown on the display panel. When in the operating menu, the ON button ² serves as the ESC (cancel) key, i. e. you cancel your entry and return to the standard display. Working with the operating menu By way of example of the "Chan. mode" menu (Channel mode), this section describes how to use the operating menu. For an overview of the operating menu, please see page 22. Make sure that the lock mode is deactivated (see page 20). Getting into the operating menu ´ To get from the standard display into the operating menu: Press the SET button ´. The "Channel" menu is highlighted with a black bar. 14 Operating the SR 2020 D Selecting a menu ¿ Use the menu: / rocker button ¿ to select the "Chan. mode" Display jumps to the previous menu jumps to the next menu cycles continuously Rocker button Press Press Keep or pressed ´ Press the SET button ´ to get into the setting mode of the "Chan. The current setting of the menu is displayed. Adjusting a setting in the setting mode Use the / rocker button ¿ to jump between the settings, in this example between "Tourguide" and "Conference". Storing a setting ´ Press the SET button ´ to store the selected setting. "STORED" briefly appears on the display. Exiting a menu ² Press the ON button ² to return to the operating menu. 15 Operating the SR 2020 D Exiting the operating menu ¿´ ² Use the / rocker button ¿ to select the "Exit" menu and press the SET button ´. The standard display is shown on the display panel. Or: Press the ON button ² until the standard display is shown on the display panel. Selecting the menus The transmitter's operating menu contains the following menus: Menu "Channel" "Frequency" "Chan. mode" "Input" "Sensitiv" "Phantom" "Contrast" "Lock" "Reset" "Version" "Exit" Function of the menu Selecting a channel (see page 17) Displaying the frequency of the current channel (see page 17) Selecting the channel mode (see page 18) Selecting the input signal (see page 19) Adjusting the input sensitivity (see page 19) Displaying the phantom power (see page 20) Adjusting the contrast (see page 20) Activating/deactivating the lock mode (see page 20) Loading the factory-preset default settings (see page 21) Displaying the current software version (see page 21) Exiting the operating menu 16 Operating the SR 2020 D Setting a channel ("Channel") To set a certain channel, proceed as follows: 1. Make sure that the transmitter and the receivers are set to the same channel mode ("Tourguide" or "Conference"), otherwise no connection can be established (see page 18). [. . . ] power consumption Nominal output voltage Nominal output current Operating temperature range 230V AC 50 Hz/60 Hz 9W 13V DC 300 mA 0 °C to +40 °C NT 2-1-US mains unit (Cat. 087246) Nominal input voltage Mains frequency Max. power consumption Nominal output voltage Nominal output current Operating temperature range 120V AC 60 Hz 9W 13V DC 300 mA 0°C to +40°C 26 Manufacturer Declarations The devices comply with the following European standards: Radio: EMC: Safety: ETSI EN 301357-1/-2, Class 1 0682 ETSI EN 301489-1/-9, EN 55103-1/-2 EN 60065, EN 61558 Frequency range 863 ­ 865 MHz, approved in: AT, BA, BE, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LI, LT, LU, LV, ME, MK, MT, NL, NO, PL, PT, RO, RS, SE, SI, SK, TR, UA. The SR 2020 D transmitter complies with the following US and Canadian standards: USA: FCC-Part 15 C Canada: RSS-210 Issue 7 FCC ID: DMO SR 2020 D IC: 2099 A - SR 2020 D Manufacturer Declarations Warranty Sennheiser GmbH & Co. [. . . ]