User manual SENNHEISER SR 3054

[. . . ] 4 Delivery includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Overview of the SR 3054 G3 transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Overview of the displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In addition, the display backlighting changes from orange to red and "RF Mute" flashes in alternation with the standard display. Use this function to prepare a transmitter for use during live operation without causing interference to existing transmission links. To activate the RF signal: Briefly press the STANDBY button ¶. "RF Mute Off?" appears on the display panel. The transmission icon is displayed again. Deactivating the lock mode temporarily You can activate or deactivate the automatic lock mode via the "Auto Lock" menu item. If the lock mode is activated, you have to temporarily deactivate it In order to be able to operate the transmitter: Press the jog dial. "Locked" appears on the display panel. "Unlock?" appears on the display panel. The lock mode is temporarily deactivated: When you are in the operating menu The lock mode remains deactivated until you exit the operating menu. When the standard display is shown The lock mode is automatically activated after 10 seconds. The lock mode icon PEAK PEAK flashes prior to the lock mode being activated again. ew300IEM 0 -10 -20 -30 -40 0 -10 -20 -30 -40 B. Ch: 20. 24 531. 375 MHz EQ Standard -18dB 15 Using the transmitter Activating/deactivating the RF signal To deactivate the RF signal: When the standard display is shown on the display panel, briefly press the STANDBY button. "RF Mute On?" appears on the display panel. Sync Switch your rack-mount transmitter and your portable receiver on. Press the button » on the transmitter. The icon appears on the display panels of the transmitter. ­ ¿ 6 »¿ 6 4 2 OFF PHO 4 2 OFF NES PHO NES Place the infra-red interface of the receiver (see the instruction manual of the receiver) in front of the infra-red interface ¿ of the first transmitter. The first unused frequency preset is transferred from the receiver to the transmitter. Place the infra-red interface of the receiver (see the instruction manual of the receiver) in front of the infra-red interface ¿ of your transmitter. The parameters adjusted via the "Sync Settings" menu item are transferred from the transmitter to the receiver. In addition, the current frequency bank and channel setting is transferred. 17 Using the transmitter Easy Setup Sync When the transfer is completed, the display panel of the transmitter displays the numbers of the transferred frequency bank and channel. Sync When the transfer is completed, " " appears on the display panel of the transmitter. The transmitter then switches back to the standard display. Please note that the transmitter does not The transferred parameters are automatically store the frequency bank and automatically adjusted and stored by the channel setting. The transmission link between transmitter and receiver is now established. Place the infra-red interface of the portable receiver in front of the infra-red interfaces of the remaining transmitters, one after the other. In each case, the next unused frequency preset is transferred from the receiver to the transmitter. Store the frequency bank and channel setting by pressing the jog dial on your transmitters. [. . . ] Check the squelch threshold setting on the receiver. Reduce the squelch threshold (see the instruction manual of the receiver). RF signal available, no audio signal at the receiver No input signal at the transmitter Very low input signal Check the audio level on the transmitter display (see page 7). Check the audio level on the transmitter display (see page 7), increase the level of the input signal or adjust the input sensitivity (see page 20). Adjust the transmitter sensitivity correctly. Audio signal has a high Transmitter sensitivity is adjusted too level of background noise low Audio signal is distorted If "AF PEAK" additionally appears on the Adjust the transmitter sensitivity correctly. [. . . ]