User manual SEVERIN FR 2436

[. . . ] 9 ╞ Deep Fryer Dear Customer, Before using the appliance, the user must read the following instructions carefully. Connection to the mains supply The appliance should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating label. This product complies with all binding CE labelling directives. [. . . ] Do not operate the appliance unless the heating element and frying container have been properly fitted and the container has been filled with oil or fat. Indicator lamp During the heating-up process, the indicator lamp flashes. As soon as the frying temperature is reached, the lamp remains steady. Frying baskets The baskets are designed to hold the food to be fried. Before use, the handles must be fitted to the frying baskets. Ensure that the right handle 12 is fitted to each basket. (The handle with the locking mounting fits on the large basket, that with the locking-catch to the small one. ) To attach either handle, press its two sides together and insert the angled pieces into the corresponding openings on the basket. Pull the handle towards the rim of the basket and use the two protruding support brackets to secure it. Using both frying baskets allows for deepfrying different kinds of food at the same time. Put the food that requires a shorter cooking time into the smaller basket and take it out again once the food is done, leaving the large basket in the hot oil/fat until this food is also cooked. Caution: The small basket must only be used together with the large basket. 300 g French fries Combination of large and small frying baskets: max. 300 g French fries in each basket Please refer to Useful hints for deep-frying. Cooking timer Once the pre-set temperature has been reached, the indicator ‘00’ starts flashing inside the green LCD display field. Use the buttons and to select a cooking time between 1 and 30 minutes. The LCD timer is activated by pressing display field shows the remaining cooking time. Five beep signals indicate that the preset time has elapsed; the indicator ‘00’ flashes in the display field. Switching the deep fryer On/Off Insert the plug into a wall socket; the green LCD display field lights up and a long beep is heard. The LCD display field shows 190° and ‘00’. A short beep is heard, the indicator lamp flashes and the heating process starts. (If no further adjustments are made after connecting the appliance to the mains, the green LCD display field goes out and the appliance switches into an energy-saving mode. [. . . ] Old oil/fat (or oil containing a residue of particles from earlier use) is inflammable and tends to ignite easily. It is therefore best to change the oil/fat after it has been used three or four times, bearing in mind that its life-span depends mainly on the kind and quantity of food fried. The life span can be extended by filtering the frying oil/fat after each cycle of use. The frying oil/fat may be stored inside the deep fryer if the unit is kept closed and stored in a cool place. [. . . ]