User manual SEVERIN KAFFEEAUTOMAT MIT TIMER KA 4030

[. . . ] To prevent the danger of hot water or steam being emitted, always switch off the coffee maker and allow sufficient time for the appliance to cool down before it is opened or any accessories or attachments are removed. Once the water container has been filled with water, ensure that the filter and the glass carafe have been correctly fitted to the appliance. If the appliance is witched on accidentally, this will prevent the hot water from being emitted in an uncontrolled way. it is possible for the function of the appliance to be interrupted by a nearby source of electrostatic discharge. [. . . ] 125ml, while the right scale is used for smaller cups. Make sure that the indicated maximum amount of water is not exceeded. If several consecutive brewing cycles are required, switch off the coffee maker after each cycle and let the appliance cool down for approx. Important note: When filling the appliance with fresh water shortly after a brewing cycle is completed, there is a Setting the time Insert the plug into a suitable wall outlet. None of the indicator lights will come on. The coffee maker is switched off, the LCD display showing 0:00. the internal clock uses a 24-hour display format. The current time is set by using the H button for the hours, while the M button is used to set the minutes. - Press the H button repeatedly (or keep it pressed for the necessary length of time) until the LCD display shows 15:00. - Press the M button (or keep it pressed) until the LCD display shows 15:30. Timer To start the brewing process with a delayed timer setting, the timer must be set to the desired time. - While the PROG button is pressed, the desired time can be set using the buttons H und M. Danger of scalding from hot water or steam escaping through the water outlet. Making coffee - Filling with water: Open the water container lid, fill the container with the desired quantity of water and replace the lid. - Inserting the paper filter: Open the swing-out filter sideways and insert a size-4 paper filter into the filter holder, first folding down the perforated sides of the filter. - Filling with ground coffee: For each regular-sized cup (125ml), a measure of about 6 g (= 11/2 - 2 teaspoons) of medium or finely ground coffee will be required. - Preparing the glass carafe: Fit the aroma protection lid onto the carafe, and then place the carafe into the appliance. if correctly inserted , the lid will disable the drip-stop mechanism in the filter holder during the brewing cycle. - Starting the brewing cycle: Press the On/Off button twice to switch on the coffee maker. The LCD display shows AUTO, and the red indicator light AUTO comes on. the coffee make automatically switches on at the pre-programmed time. - Removing the glass carafe: Wait until all the water has passed through the filter before the carafe is removed from the appliance. [. . . ] Wipe dry afterwards - Both glass carafe and lid are dish-washer safe. Disposal Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points. Guarantee This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. [. . . ]