User manual SEVERIN VL 8631

[. . . ] Power cord with plug Important safety instructions Do not operate the fan if the appliance is not completely assembled or if the protection grille is not correctly installed, closed and secured with the retaining ring. Do not leave the appliance unattended while in use. Before the appliance is used, the main body as well as any fitted attachment should be checked thoroughly for any defects. [. . . ] When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. This appliance is not intended for use by any person (including children) with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with. This appliance is only intended for domestic use and not for commercial applications. In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. Are needed, please send the appliance to one of our customer service departments. The address can be found in the appendix to this manual. Before using the appliance for the first time Remove all packaging completely before the appliance is used for the first time. Assembly - First lead the power cord through the opening in the base, and then through the small opening at the rear of the base. - Place the rear of the unit gently into the opening of the base, then push the front part down into the base until it locks into place. - Secure the base to the main unit from below using the screws provided. - Remove the central grille locking ring from the motor housing by turning it anti-clockwise. The two alignment pins on the motor housing must fit into the corresponding slots in the grille. - Place the front grille in front of the rear grille into the retaining ring and tighten the retaining ring screw. Ensure that both grille rims are correctly positioned in each of the corresponding recesses inside the retaining ring. Operation - Insert the plug into a suitable wall socket. - To adjust the tilt angle of the fan head, simply push the grille upwards or The fan head assembly automatically locks into its various positions. [. . . ] Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. [. . . ]