User manual SEVERIN WK 3342

[. . . ] In the event of such damage being found, the appliance must no longer be used. ρ¬ Do not operate the appliance if excessive force has been used to pull the power 8          cord. Damage cannot always be detected from the outside; the entire unit should therefore be checked by a qualified technician before it is used again. This appliance may be used by children (at least 8 years of age) provided they have been given supervision or instruction concerning the use of the appliance and fully understand all dangers and safety precautions involved. [. . . ] ρ¬ When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. ρ¬ No responsibility is accepted if damage results from improper use, or if these instructions are not complied with. ρ¬ This appliance is intended for domestic or similar applications, such as in - staff kitchens, offices and other commercial environments, - agricultural areas, - hotels, motels etc. and similar establishments , - bed-and-breakfast guest houses. ρ¬ In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The address can be found in the appendix to this manual. Thermal safety cut-out The preset thermal safety cut-out protects the heating element from overheating should the appliance be erroneously switched on without any water, or if the heating element is calcified. Once the safety cut-out has switched 9 off the kettle, it must be allowed to cool down sufficiently, or must be descaled before it is switched on again. and similar establishments , - bed-and-breakfast guest houses. Boiling water – Remove the water container from its base. €“ Push the release button to open the lid, and fill the container with water to the desired level, observing the Min. €“ Close the lid and replace the container on its base. Insert the plug into a suitable wall socket. Info: Once the appliance is connected to the mains or the container is placed on its base, the temperature selection buttons light up briefly in the sequence red-green. €“ To turn the appliance on, use the appropriate button, which will start flashing red. During the heating period, the temperature can be changed at any time. – The heating process begins. €“ As soon as a certain temperature level has been reached during the heating process, the corresponding temperature selection button shows a green light. €“ After reaching boiling point (or the selected temperature), the appliance switches off automatically. A triple beep signal is heard and the corresponding button shows a steady light. €“ Around 30 seconds after the appliance has switched off, the temperature button indicator lights will also go out. [. . . ] Sieve If necessary, the sieve can be removed from the spout for cleaning. General cleaning and care  Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely. ρ¬ To avoid the risk of electric shock, do not 10 clean the kettle and the base with water and do not immerse them in water. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. [. . . ]