User manual SHARP 32JF-76E

[. . . ] (Hereinafter called «the Company») guarantee to provide for the repair of, or at its option replace the Sharp Equipment, or any component thereof, (other than Batteries), which is faulty or below standard, as a result of inferior workmanship or materials. This guarantee shall only apply to defects or faults which are notified to the Company, or its approved Service Facility within one year from the date of purchase of the equipment. This guarantee covers equipment intended for private domestic use only. This guarantee does not apply to equipment used in the course of a business, trade or profession. [. . . ] The sound mode will appear on the screen. Depending on the sound transmission the sound reproduction can be chosen as indicated below: When the TV set is receiving a STEREO programme, the TV selects STEREO automatically, and you can change: STEREO MONO When the TV is receiving a BILINGUAL programme, the TV selects DUAL CHANNEL A automatically, and you can change: DUAL CHANNEL A DUAL CHANNEL B DUAL CHANNEL A B MONO When the TV is receiving a MONO (NICAM) programme, the TV set selects MONO NICAM automatically, and you can change: MONO NICAM MONO (FM) When the TV is receiving a MONO (FM) programme, the TV set selects MONO automatically but the sound mode cannot be changed. Note: STEREO MONO See the Sound Setting Mode (page 21) to change the sound mode for the headphones. External source: When you are watching the TV set through the EuroSCART, AV-1 or A/V FRONT terminals, the Sound mode button is not operative. 20 s Sound Setting Mode Sound quality (VOLUME, BASS, TREBLE, BALANCE, NORMALISE, SOUND MODE and SPATIAL EXPANDER) are adjustable in this menu. 1. Press the MENU button b to see the MAIN menu. Press the GREEN button to see the SOUND menu. MAIN menu GREEN SOUND menu 3. Press the RED button the GREEN button to select LOUDSPEAKERS or press to select HEADPHONES. CH VOLUME BASS TREBLE BALANCE LOUDSPEAKERS 4. Press the Channel UP/DOWN buttons / CH to select an option from the list: VOLUME, BASS, TREBLE, BALANCE or NORMALISE. The selected option will appear in white letters on a blue background. Adjust the sound quality according to your preferences with the Volume DOWN/UP buttons / . LOUDSPEAKERS HEADPHONES RED GREEN NORMALISE Select NORMALISE and press the MENU button b to normalise audio levels to default factory settings. VOLUME LOUDSPEAKERS 6. Press the Channel DOWN button to see more options: SPEAKERS (Mode), HEADPHONES (Mode), EFFECTS, SOUND IDENT. , and DYNAMIC BASS. CH BASS TREBLE BALANCE NORMALISE Press the MENU button to normalise. . . SOUND mode 7. Press the Channel UP/DOWN buttons LOUDSPEAKERS or HEADPHONES. CH / CH to select: LOUDSPEAKERS HEADPHONES EFFECTS STEREO Press the Volume DOWN/UP buttons / to change the sound mode, as indicated on page 20, in the section Sound mode button. 8. Select EFFECTS* and press the Volume DOWN/UP buttons to activate or deactivate the SPATIAL EXPANDER effect. / SOUND IDENT. Select SOUND IDENT. ** to activate (ON) or deactivate (OFF) the automatic identification of audio system of the current program. The GREEN button is used to cancel the SWITCH ON function. 8. Press the MENU button b to close the menu. Press the Stand-by button ( TV) on the remote control to put the TV into switch on Stand-by Mode. LED indicator on the TV set turns RED to ORANGE during ON TIMER is activated. Note: As a safety precaution, in the case of nobody being home when the television switches on automatically, the television will disconnect itself after 120 minutes; if it is to continue to run, any button on the remote control functions should be pressed. In the event of a power cut, disconnection from the plug or television switch, all the data on the ON TIMER will be cancelled. CANCEL GREEN s OFF TIMER The OFF TIMER automatically switches the TV set to Stand-by Mode after a predetermined period, (30, 60, 90 or 120 minutes). to see the FEATURES menuOFF TIMER. FEATURES menu - OFF TIMER ON TIMER OFF TIMER CHILD LOCK DEMO 0FF 120 Min. Pressing the Volume UP button white letters. Select OFF to deactivate off-timer. , select the desired period in 2. Press the MENU button b to close the menu. Note: The OFF TIMER data will be cancelled if you turn off the TV by the Stand-by button ( TV) on the remote control or with the main power button (®) on the TV set. 23 s Child Lock (Channel Block) You can lock a TV channel to prevent unsupervised TV viewing by following these procedures; the protection can apply to the television itself LOCK ALL or to specific programmes LOCK PROG. . With the CHILD LOCK function, you can also programme a time period during which the TV will be protected. Press the MENU button b to see the MAIN menu. Press the YELLOW button to see the FEATURES menu. YELLOW FEATURES menu 3. [. . . ] If you try to store more than 4 page numbers in a programme position between 10 and 99, the previously stored page numbers will be erased. 1. 8. Select the programme channel number into which you want to store Teletext page numbers. Press the TEXT/MIX/PICTURE button twice to select the Teletext mode. Press the LIST button to change from FLOF system to LIST mode. Press a COLOUR button corresponding to the coloured brackets on the screen for page number storage. Enter the Teletext page number using the 0 ~ 9 digit buttons (enter three digits). [. . . ]